Harley Benton ISO-3AC SAG Modular Quick Start Manual

Safety instructions
Intended use
This product is meant to be used as a multiple power supply for effect pedals. Any
other use or use under other operating conditions is considered to be improper
and may result in personal injury or property damage. No liability will be assumed
for damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and
are not within reach of babies and young children. Choking hazard! En-
sure that children do not detach any small parts from the product. They
could swallow the pieces and choke!
Features
• Multiple modular power supply unit with SAG option for easy voltage reduction
for fuzz and distortion effects
• 4 isolated, filtered and short-circuit proof outputs eliminate noise and hum
• High current output for modern digital and analogue effects
• LED monitoring at each output
• AC-switchable 100 – 240 V universal input voltage operation
• Modular mains output allows two or more devices (max. 4 A) to be connected via
a female-to-male kettle cable (included)
Scope of delivery
• 5 × DC cable 60 cm, 5.5 × 2.1 mm straight-to-angled plug
• 1 × power cord with EU plug, 1.2 m length
Operating elements
1 Voltage control 1 – 4 for the respective output 1 – 4
2 Outputs 1 – 2, adjustable between 4 V and 9 V
3 Outputs 3 – 4, adjustable between 6 V and 18 V
4 Output 5, 12 V @ max. 1000 mA
5 Control LED for outputs 1 – 5, lights up green when voltage is applied, turns
off when the output is deactivated due to overload
6 Power cord connection for power supply
7 Mains cable connection to supply voltage to one or more additional devices
(max. 4 A)
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • info@thomann.de
PowerPlant
ISO-3AC SAG Modular
@ 500 mA
@ 500 mA
Quick Start Guide
This quick start guide contains important information on the safe operation of the
product. Read and follow the safety advice and instructions given. Retain the quick
start guide for future reference. If you pass the product on to others please include
this quick start guide.
Where to use the product
Never use the product
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty areas
• at locations where the unit can become wet
General handling
• To prevent damage, never use force when handling the product.
• Never immerse the product in water. Just wipe it with a clean dry cloth. Do not
use liquid cleaners such as benzene, thinners or flammable cleaning agents.
• Compact, robust aluminium housing, can be used on or under pedal boards
• Connections ( ):
- Output 1 – 2: SAG 4 – 9 V @ max. 500 mA (individually isolated)
- Output 3 – 4: SAG 6 – 18 V @ max. 500 mA (individually isolated)
- Output 5 LINK: 12 V @ max. 1000 mA for supplying additional
DC input power supplies
• Dimensions (W × H × D): 130 × 35 × 88 mm
• Weight: 400 g
• 1 × Kettle cable socket-to-plug
q
w
y
e r
t
u
DocID: 523016_08.07.2021
EN