Page 2
S-Charge Display Kit Principal dimensions & specifications This kit is compatible with the Steeper S-Charge System; a user friendly battery system with OLED Display & mounting frame display and a magnetic charger, that is fitted into a prosthesis to allow the user to easily activate,...
Page 3
Removal of old S-Charge Display Fitting of new S-Charge Display Remove the old Display from the forearm by inserting a flathead screwdriver under the mounting Place the foam gasket around the mounting frame, beneath Mounting frame frame - the mounting frame will break. the inner lip.
Page 4
Display itself. Feed the full system through the forearm, and pull the Display The Steeper S-Charge System and its associated components are not waterproof and should not be exposed through so it exits the forearm through the mounting frame to moisture.
Disposing of this product correctly will help save valuable resources and prevent any potential faulty batteries back to Steeper. You must state if you wish us to supply a replacement. negative effects on human health and the environment, which could otherwise arise from The warranty will be void on all system components if any components have been subject to abuse, inappropriate waste handling.
• IEC 60601-1-11: 2015; Includes meeting requirements: ISO 14971:2012. • IEC 60601-2: 2014. Steeper is registered with both the Medicines and Healthcare Regulatory Authority in the UK and the • IP22 to BS EN 60529: 1992+ A2: 2013, when the S-Charge display is sealed using the silicone Food and Drugs Administration of the United States Government for the manufacture and supply of sealant as outlined in the fitting instructions.
Page 7
Steeper Group SteeperUSA Unit 3, Stourton Link 3619 Paesanos Parkway Intermezzo Drive Suite 200 Leeds San Antonio LS10 1DF TX 78231 United Kingdom +44 (0) 113 270 4841 210 481 4126 customerservices@steepergroup.com inquiries@steeperusa.com www.steepergroup.com www.steeperusa.com STPPR059 Issue 5...
Need help?
Do you have a question about the SCDIS and is the answer not in the manual?
Questions and answers