Advertisement
7. Level 2 Repair
7-2. Assembly
1. Soldering 2 points of MIC FPCB pad with PBA.
3. Soldering 2 points of RCV FPCB pad with PBA.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
CAUTION
Check F-PCB to MAIN PCB soldering tightly.
(If there is a gap between F-PCB and Main
board will makes faulty)
Be careful not to make Flux on the Main Board
(Use the cover of Soldering Jig)
2. Soldering FPCB of the LCD MODULE.
Be careful not to make a gap between LCD
FPCB and Main Board.
Height of solder should not over 0.2mm.
4. Combine LCD to Main Board.
Don't push the panel of LCD while combine
the LCD
7-4
Advertisement
