Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zendure SuperBase Pro 2000
Summary of Contents for Zendure SuperBase Pro 2000
- Page 1 SuperBase Pro 2000 User Manual...
-
Page 2: Table Of Contents
Users take full responsibility for the safe usage and operation of this product. Familiarize yourself with relevant regulations in your area. You are solely responsible for being aware of all relevant regulations and using Zendure products in a way that is compliant. Keep this manual for future reference. CONTENTS Specifications... -
Page 3: Specifications
1. Specifications General Weight ≈ 46.5lbs / 21.2kg Dimensions 17.5 × 10.5 × 13.8in / 446 x 276 x 352mm Capacity 2,096Wh (44.8Ah/46.8V) Supported Wi-Fi Supported Cell Network & GPS Outputs Pure Sine Wave, rated 2,000W (surge 4,000W), AC (6*) 100-120V~50/60Hz (US, JP version) or 220-240V~50/60Hz (Other versions) USB-C1/2: 5-20V, 100W Max Each... -
Page 4: Safety Guidelines
3.Do not expose to moisture or submerge it in liquid. 4.Do not use around strong static electricity or magnetic fields. 5.Do not disassemble the product. Consult official Zendure channels when service or repair is required. Incorrect disassembly or reassembly may result in a risk of fire or injury to persons. -
Page 5: Getting Started
2.2 Disposal Guide 1.When possible, fully discharge the battery before disposing of it. Consult your local laws on battery recycling and disposal. 2.If the battery cannot be fully discharged due to product failure, contact a professional battery recycling company for further processing. -
Page 6: Display
3.2 Display Power Ring Error Warning AmpUp Mode High Temp Warning PVMax Low Temp Warning GridFlow Sleep Mode Cell Network Fans Power Button & Display ON/OFF Wi-Fi Reset Button Current Input Current Output AC Power Button AC On DC Power Button Power Factor DC Out Remaining (Recharging) Time... -
Page 7: General Product Usage
The Display will automatically turn off after 1 minute of idle operation. You can change this through the Zendure App. When the product senses any load change or other changes to its operations, the Display will automatically light up. - Page 8 AC Output Port With the device powered on, briefly press the AC Power Button. The AC Power indicator will illuminate. Briefly press the AC Power Button again to turn it off. To change 50Hz or 60Hz, press and hold the AC Power Button for 3 seconds. The default standby time of the AC Output port is 1 hour.
-
Page 9: Ac Recharging
Zendure’s GridFlow fast charge technology is specifically for AC recharging, offering 1,800W of maximum input power. This limit can be modified in the Zendure app. In case of unusual situations where the AC input current remains higher than 20A, the AC input port will initiate a self-protection function, and the Overload Switch on the product will automatically pop up. -
Page 10: Solar Recharging
1,800W Max via AC Input, 60-160Vmp DC, PVMax MC4 Connector When using Zendure 200W Solar Panels (sold separately) to charge the product, please follow the instructions that come with the solar panels. Before connecting a solar panel, please ensure that the solar panel’s output voltage is within 75Voc via XT60 input or 200Voc via AC input to avoid damaging the product. -
Page 11: Car Recharging
Read the Zendure App user guide and access the download link here: https://app.zendure.com/download Privacy Policy By using Zendure Products, Applications and Services, you consent to the Zendure Terms of Use and Privacy Policy, which you can access via the "About" section of the "User" page in the Zendure App. -
Page 12: Ampup Mode
3.9 AmpUp Mode With Zendure AmpUp technology, the product can power a 3,000W max device while the rated output power remains 2,000W, avoiding operation failure due to overload protection. You can turn on AmpUp Mode in the Zendure App. AmpUp Tips: 1.AmpUp is not available when the AC output is turned on in a recharging... -
Page 13: Faqs
It can be resumed automatically after the battery High Temperature Protection cools down. It can be resumed automatically after the battery Low Temperature Protection temperature rises above 32°F (0°C). Contact Zendure Customer Service for further Error Warning information... -
Page 14: What's In The Box
6. What’s in the Box SuperBase Pro 2000 Warranty Card Accessory Pouch Quick Guide USB-C to USB Adapter MC4 to XT60 Cable 3m AC Cable 1.5m MC4 to AC Cable 3m 7. Storage & Maintenance 1.Ideally, use and store the product between 59°F and 95°F or 15°C and 35°C, and always keep it away from water, intense heat, and sharp objects.