Cisco Catalyst 9136I Series Hardware Installation Manual page 31

Configuring and Deploying the Access Point
The access point status LED indicates various conditions, which are described in the following table.
Table 2: LED Status Indications
Message Type
Association status
Boot loader status
Boot loader error
Operating status
Access point operating system
errors
LED State
Green
Blue
Green
Blinking Green
Blinking Blue
Alternating between Green and Red
Cycling through
Red-Off-Green-Off-Blue-Off
Cisco Catalyst 9136I Series Access Point Hardware Installation Guide
Checking the Access Point LEDs
Message Meaning
Normal operating condition, but no
wireless client associated
Normal operating condition, at least
one wireless client association
Executing boot loader
Boot loader signing verification
failure
Software upgrade in progress
Discovery or join process in
progress
General warning; insufficient inline
power
23