Advertisement
2. INTRODUCTION
Cordless 20V backpack garden sprayer. This sprayer does not require manual pressing which makes it easy and practical to use. Supplied
with 3 different nozzles to meet different needs and an auto cut-off function. This backpack sprayer can be used for sterilization, disinfection,
weed killing as well as watering flowers and spraying water. It has an added filter to prevent larger particles clogging the machine. With
strong durable back straps to ensure comfort when worn. 15L water tank with a lance holder clip. Spraying lance including hose is 2.53m.
Requires compatible 20V battery and mains charger, sold separately.
3. SPECIFICATION
Model No: ........................................................... CP20VGBS
Consumable parts: .................................................................
Battery (not included): ............................................................
2Ah ...................................................................... CP20VBP2
4Ah ...................................................................... CP20VBP4
6Ah ...................................................................... CP20VBP6
Mains Charger (not included): ............................... CP20VMC
Dimensions (W x D x H): ............ 315mm x 320mm x 580 mm
Hose length: ................................................................... 1.7m
Maximum flow rate: .................................................. 1.3L/min
Maximum pressure:......................................................1.6bar
Noise power: ............................................................. 83dB(A)
Noise pressure: ......................................................... 72dB(A)
Tank capacity: .................................................................. 15L
Vibration: ................................................................ 0.494m/s²
Vibration uncertainty: ................................................. 1.5m/s²
4. CONTENTS
ITEM
DESCRIPTION
1
Nozzle
2
Spray pipe
3
Fluid tank lid
4
Spray pipe holder
5
Fluid tank reservoir
6
Trigger lever
7
Control handle
8
Water pipe
9
Power switch
10
Battery cartridge cover
11
Bolt
12
Back pad
13
Back strap
14
Nozzle selection
5. ASSEMBLY
5.1.
INSTALLING THE BATTERY CARTRIDGE
5.1.1.
Open the battery cover door by releasing the sprung catch (fig 1).
5.1.2.
Align the tongue on the battery cartridge with the groove in the battery housing and slide into place.
5.1.3.
Insert all the way until the battery cartridge is locked into position with an audible click.
DO NOT try and insert the battery cartridge forcibly.
8
5.1.4.
Firmly close the battery cover (fig 3).
5.2.
REMOVING THE BATTERY CARTRIDGE
5.2.1.
Open the battery cover door by releasing the sprung catch (fig 1).
5.2.2.
Push the battery cartridge latch button, then slide and remove the battery (fig 2).
5.2.3.
Firmly close the battery cover (fig 3).
WARNING! Ensure that the sprayer is switched off and the battery cartridge is removed prior to undertaking any work on the
‰
sprayer.
© Jack Sealey Limited
Original Language Version
CP20VGBS Issue 2 (2,3) 18/02/22
Advertisement
