Advertisement
4297 MY-WIFI KIT QSG ftp.qxp_Layout 1 29/10/2021 07:29 Page 4
Assembly
(Cont.)
Fasten
the main
body
holder
Mount your antenna
on the MagPole using
the cable ties and use
the Metal Mount Disk
for non-ferrous surfaces
to attach the magnet.
Full MMD instructions
are in the Disk box.
4
Screw up the holder
7
Plug the rubber seal to
8
the holder
Screw up the spiral cover
9
Plug in the
Device
Now power on the repeater by connecting the power
lead to the small white POE converter and plugging
the white LAN Networking cable in to the POE socket.
Press the small grey button and the LEDs will light on
the main unit. Wait 30 seconds for the kit to start up
completely.
Connect your device (laptop, smartphone, tablet
etc), to the repeater
Click the network icon on the right bottom of your
laptop, or search for Wireless Networks – you will find
Wavlink-AC (=5GHz) or Wavlink-N (=2.4GHz)
Click Connect – wait a few seconds........
Your device is now connected to My-WiFi
Now, connect My-WiFi to the chosen network
Open a web browser and type http://192.168.10.1 or
http://ap.setup in the browser address box.
This number is the default IP address for My-WiFi.
Easy Set Up Guide
5
Advertisement
