Page 1
Hand mixer RM-250A Instruction manual RM-250A...
Page 2
ORAVA electrical appliances are manufactured according to the state of the art and recognized safety-technical rules. Nevertheless, the use or use contrary to designation may result in the risk of injury or endanger the life of the user or third person, damage to the device and other material values.
Page 3
• Keep the operating instructions as close to the device as possible throughout its service life. Always keep the operating instructions together with the appliance for future use and use by new users. • Use the appliance only for the purpose for which it is intended and in the manner specified by the manufacturer.
Page 4
• Do not pull the power cord / power cord by pulling on the cord / cord. Disconnect the power cord by pulling the plug behind the power cord / power cord plug. • If you use an extension cord, check that the total rated (ampere) power of all devices connected to the extension cord does not exceed the maximum current rating of the extension cable.
Page 5
1.4 Safety of persons • This appliance is intended for use by persons without an electrotechnical qualification (layperson) according to the instructions specified by the manufacturer. • Device operation includes activities such as switching on and off, user manipulation and setting of operating parameters, visual or auditory inspection of the equipment, and user cleaning and maintenance.
Page 6
Special Safety Instructions. Read carefully! • Electrical equipment is designed and manufactured in such a way that ensure safe operation and use by persons without professional qualifications. Despite all the measures taken by the manufacturer to ensure safe use, handling and use, it carries with it some residual risks and associated potential hazards.
Page 7
• Only persons who are competent and sufficiently physically fit to carry the device (in view of the size and weight of the device) can only be transported. There is a risk of serious injury or life threatening! There is a risk of damage to the device! Expand/Packaging •...
Page 8
Warning! • Do not expose the device to: - direct sunlight, sources and equipment producing heat, - vibration and mechanical stress, - excessive dust, - water and excess moisture, - insect, - an aggressive external environment. • Do not use or dispose of the appliance: - to unstable tables or parts of furniture, - on an uneven and dirty surface, - on the sealing edge of tables or parts of furniture,...
Page 9
Operation/Supervision Warning! • This device must only be used with original parts and accessories. • Always make sure that the device is properly assembled and that none of its parts is damaged before using the appliance. Do not use incorrectly assembled and damaged devices. •...
Page 10
Warning! • Do not bend your fingers and do not place other objects in the work area - inside the container and the rotating parts when it is in operation. • If the workspace needs to be handled (cleaning the rotating parts of the trapped food) - always only when the appliance is switched off, disconnected from the power supply and the rotating parts are completely stopped, use only the specified accessories of...
Page 11
• Before processing deep-frozen foods, allow food to thaw first to the temperature at which food can be divided into smaller (recommended) parts. Do not process excessive pieces of deep- frozen food. • Always divide the device to the recommended operating intervals and set the operating mode (continuous operation/breakthrough time) and follow these instructions.
Technical specifications Power supply: 230 V~ 50 Hz Power consumption: 450 W Class of protection: Speed: max. 15 000/min. Mixer dimensions: height 375mm, thickness (max. diameter) 60mm Weight: 0,83 kg Noise level: 85 dB (A) The declared noise emission of this appliance is 85 dB (A), which is the level of acoustic power A with respect to the reference sound power level of 1 pW.
Characteristic properties The device is designed to process different foods. It allows very effective mixing and whipping, etc. Made of quality and health-conscious materials. Pred prvým použitím Do not plug the appliance into the mains during preparation. Unpack and remove all packaging material from it. To remove any dirt that may have occurred during the packing process, clean the inside compartment, blades and cover with a dry cloth that does not release the fibers.
Parts descriptions 1 Button 1 for low speed 2 Button 2 for max. performance (TURBO) 3 Motor unit with handle 4 Place of distribution of the engine part and the mixing rod 5 Mixing/whipping stick 6 Mixing knives (anti-corrosive steel)
Page 15
Assembly of the mixing rod and use with the engine unit Follow the steps below to prepare the device for the operation. Mixing/whipping 1. Grasp the engine unit with one hand and the mixing rod with the other hand. 2. Place the mixing rod (5) on the engine unit (3). Press the mixing knob on the motor unit and turn the engine unit to the right.
Page 16
Tips for maximum blending Prior to insertion into the container, the hard fruit and vegetables must be cut to pieces approximately 1 cm in size. Even safer food types should be pre-cut to smaller pieces before mixing. Increase efficiency of mixing. If you are preparing multiple ingredients, requiring mixes of different ingredients at different rates, mix the individual ingredients separately.
Preparation of creamy dishes Processed Food Quantity per Dose Eggs 2 ~ 5 pcs (time: 30 ~ 70 seconds) Soft cheese 125 ~ 350 ml (time: 20 seconds) Notes: - You can use the mixing stick to mix cheese and eggs and to quickly create mayonnaise or puddings.
Page 18
Producer: ORAVA retail 1, a.s. Seberíniho 2 821 03 Bratislava Slovenská republika Importer: ORAVA retail 1, a.s. ORAVA distribution CZ, s.r.o. Seberíniho 2 Ostravská 494 821 03 Bratislava 739 25 Sviadnov Slovenská republika Česká republika DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT The symbol on the product or on its packaging indicates that this product does not belong to household waste.
Need help?
Do you have a question about the RM-250A and is the answer not in the manual?
Questions and answers