Page 3
Swing Gate Opener User Manual relating to the use of the information contained in or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages. This manual and the information contained therein may include technical, other inaccuracies or typographical errors.
Page 4
User Manual About the Company ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks.
User Manual Installation The ZK-SW400DC swing gate opener is suitable for single leaf gates weighing less than 400kg and measuring less than 3m in length. To combine the screw rod transmission, the drive mode uses the worm and worm gear. For security purposes, this gate opener must be put inside the enclosure or yard.
The motor and power cables are routed via one PVC pipe, while the control cables are routed through the other. Mounting brackets fixing To install the ZK-SW400DC main machines firmly, it is recommended to use the expansion screws to fix the mounting brackets. 4.3.2 Accessory Installation Before installing the main machines, please install the wall bracket on the wall first, then fix the connecting bracket, and finally install the front mounting bracket on the door.