Advertisement
emergency message will be sent to Global Rescue, along with
your location, at regular intervals. It will also flash yellow initially
letting you know that a message is queued up to be sent.
When possible, it's better to activate an SOS through the Bivy
app (see page 5) so you can communicate directly with Global
Rescue about the nature of your emergency.
To cancel an SOS from the Bivy Stick, press and hold the SOS
button for 5 seconds. Once the red light stops flashing, the
SOS has been canceled.
TRACKING
You can start tracking your location by pressing the Check-In
button for 5 seconds. While tracking, your location will be sent
to your Bivy profile on the cloud at the interval designated in
the app. The default interval is 10 minutes. The Status light will
flash blue while you are tracking. Stop tracking by pressing the
Check-In button for 5 seconds. You can later view this track by
going to your profile in the Bivy app and then select Tracks.
BIVY STICK MOUNTING SYSTEM
The Bivy Stick comes ready to adapt to any GoPro® mounting
system. This is done by using the provided ¼" – 20, 2-prong
GoPro® mount adapter. Thread the adapter into the back of
the Bivy Stick, then attach to the GoPro® mounting system of
your choice.
GoPro® is a registered trademark of GoPro, Inc. of Delaware,
which is not affiliated with the maker of this product and does
not endorse this product.
NOTE: If attaching to the outside of a vehicle or location that
may see high wind speeds, vibrations or force, you should use
a secondary tether to ensure you do not lose or damage your
Bivy Stick.
CHARGING YOUR BIVY STICK
The Bivy Stick charges using a USB-C cable and can be
charged via any USB charge port. Use the supplied USB-C to
USB-A cable or any other USB-C cable. The power indicator
light will flash while charging. Once the Bivy Stick is fully
7
Advertisement
