FlashPoint MONOLIGHT DG-400 Quick Start Manual

Safety Precautions:
1. Before using the light, make sure that the electrical outlet
of your local power supplier matches the power regulation
indicated on your lighting equipment.
2. Do not use any power supply other than the AC specifica-
tion indicated on your equipment.
3. Do not expose your lighting equipment to sunshine, mois-
ture, dust, dirt, rain, or water.
4. Any exposure to chemical solutions, gasoline, grease, oil,
paint, or detergents can result in permanent damage to
your equipment.
5. Do not insert metal parts into any lighting equipment.
Model
1 Maximum Watt Seconds
2 Guide Number (ISO 100)
3 Flash Duration
4 Flash Variability
5 Flash Beam Width
6 Recycling Time
7 Recycling Time - Battery
8 Recycle confirm
9 Flash Ready Indicator
10 Modeling Light Wattage
11 Color Temperature
12 Modeling Bulb Base
13 User replaceable flashtube
14 Built-In Slave
15 Slave Sensitivity
16 Synch Terminal
17 Synch Terminal Type
18 Synch Voltage
19 Voltage Stabilization
20 Fan Cooled
21 Test Button
22 Power Supply
23 Fuse
24 Reflector/Removable
25 Mount
26 Housing Type
27 Dimensions
26 Weight
Light Body & Rear Control Panel
1. Power Socket (include fuse)
2. Modeling Lamp
3. Buzz Switch
4. Ready Light & Test Button
5. Accessory Lock Lever
6. Handle Grip
7. Slave Sensor
8. Digital Screen
MONOLIGHT DG-400/DG-600
9. Multi-function Knob
10. Sensor Button
11. Synch Socket
12. Power Switch (AC/DC)
13. Angle Adjustment Handle
14. Stand mounting bolt
15. Battery Socket
6. Dry your hands before handling the equipment, as touch-
ing your equipment with wet hands is dangerous to both
the equipment and to you.
7. Do not keep the power on when the light is not in use.
8. Do not attempt repairs to your lighting equipment person-
ally. If a problem arises, contact the store from which you
purchased the light.
9. This flash has an over-frequency protection circuit, rapid
continuous firing of your flash will cause an audible alert.
continued rapid firing after audible alert will cause the
flash to cease operation and trigger a "cool down" period
of approximately of 10 seconds. after this period, the flash
will resume operation. You may also reboot the flash by
cycling the power off and then on.
DG-600
200 ws
45m
1/10000 - 1/800s
Stepless Control from Full
Power to 1/32 Power
55°
0.5 - 1 Second
<1.5 Seconds
Yes
Yes
7 watts LED
5600° K
No
Yes
Yes
30ft. Radius,360 Degree
Yes
3.5
6V DC
340V+-0. 5%
Yes
Yes
AC100 - 130V 60Hz
8A
Yes
Flashpoint
Plastic
100x120x200mm
1.8kg
6
5
4
3
2
1
14
DG-600
300 ws
58m
1/10000 - 1/800s
Stepless Control from Full
Power to 1/32 Power
55°
<1.5 Seconds
<3 Seconds
Yes
Yes
7 watts LED
5600° K
No
Yes
Yes
30ft. Radius,360 Degree
Yes
3.5
6V DC
340V+-0. 5%
Yes
Yes
AC100 - 130V 60Hz
8A
Yes
Flashpoint
Plastic
100x120x200mm
2.0kg
7
8
9
10
11
12
13
15