Brookstone 322300 Quick Start Manual

LED Pulse
Safety Light
ALWAYS BE SEEN
WARNING
This product is not a toy. Contains
small parts which may cause a
choking hazard.
BATTERY PRECAUTIONS
• Dispose of the old batteries prop-
erly. Do not dispose of the old bat-
teries in a fire.
• Do not leave the batteries where a
child or pet could play with or swal-
low them. If the batteries
are swallowed, contact a
physician immediately.
• The batteries may explode if
mistreated. Do not attempt
to recharge or disassemble
the batteries.
• Use only fresh batteries of the
required size and type. Do not mix
old and new batteries,
different types of batteries, or
rechargeable batteries of
different capacities.
SAVE THESE
INSTRUCTIONS
LOCATION OF CONTROLS
1. Strobe Button
2. Battery
Compartment
3. Carabiner Clip
4. Flashlight Button
INSTRUCTIONS
1. Remove battery insulator tab. The
Motion Sensor Safety Light, which
is the default mode, turns on.
2. To switch on the strobe light, push
the Strobe Button.
3. To use in flashlight mode, hold the
Flashlight button.
4. Optionally, clip the light to a bag,
bike, or other object.
REPLACING BATTERIES
1. Use a screwdriver to open battery
compartment.
2. Remove old batteries. Dispose of
properly.
3. Insert two 3V CR-1621 batteries,
following the polarity markings.
4. Replace the battery compartment
cover.
Find thousands more
great ideas online
322300
© Brookstone 2017
Brookstone.com | 1-800-846-3000
1 Innovation Way, Merrimack, NH 03054