Page 2
CMX-FMCH002 Transmitter Front 1 Power / Status / Arc LED Indicator 4 ARC Port 2 IR In 5 RS-232 Port 3 IR Out 6 Factory Use Only 1 Power Supply Input 4 SFP Module Port 2 HDMI Input 5 Reset Button...
CONNECTION DIAGRAM Connection Instructions: Connect the source device to the HDMI In port of the transmitter with an HDMI cable, connect the HDMI Out port of the receiver to the display device with another HDMI cable. If it is a one to one connection, then use a fiber optic cable to connect the SFP port to the transmitter and receiver. If it is a one to many, use the 10 Gigabit switch as a bridge to connect the transmitter and receivers with the fiber optic cable respectively.
Page 4
IR User Guide: 1. IR blaster extension cable should plug into the IR Out port of the transmitter and receiver, the IR receiver extension cable should plug into the IR In port of the transmitter and receiver. 2. The emitter of the IR blaster extension cable should be as close as possible to the IR receiving window of the source device.
10. There are no user-serviceable parts inside the unit. If the unit requires service contact your authorized dealer, or an authorized repair service company. CAMPLEX Broadcast Fiber Solutions 812 Kings Highway • Saugerties, NY 12477 www.camplex.com...