Changing The Settings Of Your Camcorder Recordings; Adjusting The Zoom - Sony HVR-V1U Operating Manual

Operating guide
Hide thumbs Also See for HVR-V1U:
Table of Contents

Advertisement

Changing the settings of your camcorder
recordings

Adjusting the zoom

A
B
Move the power zoom lever C slightly for
a slower zoom. Move it further for a faster
zoom.
Wide view: (Wide angle)
Close view: (Telephoto)
z Tips
• The minimum distance required between your
camcorder and the subject for focus is about 1
cm (about 13/32 in.) for wide angle and about
80 cm (about 2 5/8 feet) for telephoto.
• The focus may not be adjusted at certain zoom
positions if the subject is within 80 cm (about 2
5/8 feet) from your camcorder.
• When [FOCUS MACRO] is set to [OFF], you
cannot focus on a subject within 80cm (about 2
5/8 feet) regardless of the zoom position (p. 64).
• Be sure to keep your finger on the power zoom
lever. If you move your finger off the power
zoom lever, the operation sound of the power
zoom lever may also be recorded.
Using the handle zoom
1 Set the handle zoom switch B to H
C
2 Press the handle zoom lever A to zoom
D
b Notes
• You cannot adjust the zoom speed by pressing
• You cannot use the handle zoom lever when the
• You cannot change the zoom speed of the zoom
Using the zoom ring
You can zoom at the desired speed by
turning the zoom ring D. Fine adjustment
is also possible.
b Note
• Turn the zoom ring
(high) or L (low).
z Tip
• You can set the zoom speed of the handle
zoom lever in [HANDLE ZOOM] (p. 65).
in or out.
the handle zoom lever.
B
handle zoom switch
lever C with the handle zoom switch
D
at a reasonable speed. If
you turn it too fast, the zoom speed may not
catch up with the zoom ring rotating speed.
is set to OFF.
B
.
Continued ,
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvr-v1pHvr-v1n

Table of Contents