4.3.4 Set the narrow display ................26 4.3.5 Factory reset ....................28 4.4 Other buttons on headset ............... 29 5. Note on use ....................32 6. Technical specifications ................32 1. W ’ S IN THE BOX 1.1 D EVICE ACCESSORIES ➢...
2. G ETTING STARTED 2.1 P REPARING TO USE CESIGHT 2.1.1 C HARGING THE DEVICE ➢ H EADSET To charge the headset, connect the headset (power input port) with the charger (included). When the battery icon on the Acesight VR screen...
Page 8
turns to , the battery level is low. Please charge the device. It takes less than 1.5 hours to fully charge the battery. Short press the Power Button two times to check the current battery level. Clasp ➢ C ONTROLLER The controller is non-rechargeable.
2.1.2 T CESIGHT Power Button Switching on Acesight VR: Under regular circumstances a single press of the Power Button on the headset is all that is required to wake Acesight VR from sleep mode. The...
Page 10
Acesight VR is ready when you see the image on the screen. Switching Off Acesight VR: Acesight VR will enter sleep mode when you press the power button, or by removing the device from your head and placing it on a table or other surface.
It’s very convenient. Acesight VR will shut off automatically when the battery runs out. NOTE: To maintain a fully charged battery, leave Acesight VR connected to power when not in use.
Step 1: Place the headset over your eyes and pull the strap back over your head. Step 2: Adjust the strap to ensure a comfortable fit. NOTE: Do not attempt to walk while wearing Acesight VR. 2.2.2 A DJUST THE FOCUS...
Step 1: Pick an object or face at least 4 feet (1.2m) away to look at, such as a picture on the wall. Step 2: Rotate the Focus wheel on the top of the Acesight VR headset to the left or right until the object is in focus.
To save power, the headset will go into sleep mode automatically after 5 minutes of inactivity. We recommend connecting Acesight VR to an electrical outlet when not in use, to help ensure it is fully charged each time you wish to use it.
3.3 F OCUS In general, the camera of Acesight VR is auto-focus. However, if focus lock function is needed, single click Focus Lock button to turn off auto focus. And click it again to go back to auto focus. Icon will appear in the lower right corner of the screen when Focus Lock is on or off.
The icon indicates Focus Lock function activated. The icon indicates Focus Lock function is off. 3.4 C & OLOR MODE OUTLINE DISPLAY 3.4.1 C & HANGE COLOR MODE OUTLINE DISPLAY Press the Mode Button to switch among Focus lock, 4 high contrast colors and 3 outline displays: ➢...
You can select favorite color mode in Menu. Please refer to the “Menu” section on page 24 of this guide. DJUST THICKNESS OF OUTLINES CONTRAST OF HIGH CONTRAST COLORS The thickness of the outline and the range of the contrast in high contrast color are adjustable in 5 levels by pushing the joystick left or right to adapt to various eye conditions and environments.
4. A DVANCED FUNCTIONS 4.1 F REEZE IMAGE Press the Freeze Button on the controller to freeze the image. You will see the image you are viewing frozen, a pause icon will appear in the top right corner of the screen. 4.1.1 V IEW THE FROZEN IMAGE...
If the frozen image is magnified, move the joystick up/down/left/right to pan around. If the magnification level is at 1X (no magnification) then the Joystick has no function. 4.1.2 Z OOM IN OUT THE FROZEN IMAGE Press and hold the Freeze Button first and then push the joystick up/down to zoom in/out the frozen image.
4.2 F IND FUNCTION In live view, press and hold the Freeze Button. The Find Function will be activated; magnification will zoom out to 1X and the red Find frame appears.
Turn your head and put the Find frame on the target, then release the button. The Find frame disappears and Acesight VR returns to the previously used magnification level. 4.3 M Press the Focus lock /Menu Button for 2 seconds to enter Menu. There are five options in the Menu: Favorite Magnification, Screen Brightness, Favorite Color Mode, Narrow Display and Factory Reset.
You can switch among them by pushing joystick left or right. And press the Freeze Button to confirm. Press the Focus lock/Menu Button to exit without change. Favorite Magnification Screen Brightness Favorite Color Mode Narrow Display Factory Reset 4.3.1 F AVORITE MAGNIFICATION...
Page 24
This function enables you to quickly select your favorite magnification in live view. To set favorite magnification, select the icon in Menu and press Freeze Button to enter the settings page. In the settings page, push the joystick up/down to select your favorite magnification. Then press Freeze Button to confirm and exit.
The default favorite magnification is 1X. 4.3.2 S CREEN BRIGHTNESS Select the icon in Menu and press Freeze Button to confirm and enter the settings page. In the settings page, push the joystick left/right to adjust the screen brightness. Then press Freeze Button to confirm and exit. Or press Focus lock/Menu Button to exit without any change.
You can hide contrast color combinations you do not like. There are four high contrast color combinations: white on black, black on white, yellow on black, black on yellow. Select the icon in Menu and press Freeze Button to confirm and enter the settings page.
Page 27
Narrow display helps people with peripheral vision loss (caused by Retinitis Pigmentosa, Glaucoma etc.) by shrinking the entire image into a smaller viewing area. Movement of the narrow window is also possible to avoid dark spots caused by a scotoma. Select the icon in Menu and press Freeze Button to confirm and enter the settings page.
Press and hold the Freeze Button first, and then push the joystick down to zoom out the display to fit your need. To go back, push the joystick up to zoom in the display. ➢ C HANGE THE DISPLAY POSITION By default, the view is in the middle of the display.
This function enables you to reset all the settings. Select the icon Menu and press Freeze Button to confirm and enter the settings page. To reset the settings, select “Yes” by pushing joystick left/right and press Freeze Button to confirm. If you select “No” or press Focus lock/Menu Button, it will exit without any change.
Page 30
If the Acesight VR app does not start automatically, press and hold both Arrow Buttons simultaneously for 3 seconds to reopen it. “Accessibility shortcut turn Acesight VR on” will display on the screen when the app turns 2. Toggle Button:...
Page 31
Toggle Button to the lock side “ ”. IMPORTANT: Do not attempt to repair Acesight VR or open its case to avoid voiding the warranty. Contact Zoomax support or your distributor if necessary.
• Locations subject to electromagnetic interference, such as next to medical devices that are unshielded. a) If Acesight VR becomes soiled, wipe it off using a soft, dry cloth. Use of organic solvents (such as thinner or benzene) causes deterioration and discoloration of the outer casing.
Page 33
Magnification: 1X - 16X Camera: 48 MP Screen resolution: 2340 x 1080 FHD FOV: 65° Refresh rate: 60fps Weight of headset: 1 pound (442g) Weight of controller: 0.14 pound (65g) Dimensions of Headset: 7 x 4.7 x 3.9 in (18 x 12 x 10 cm) Headset Charging time: less than 1.5 hours Headset Battery life: 3.5-4 hours...
Page 34
Zoomax Technology Co., Limited Add: 9F, Building D, Paradise Software Park, No.3 Xidoumen Rd, Xihu District, Hangzhou, China 310012 Tel: +86 (0571) 8700-6308 or VisionAid – 01775 711 977 Fax: +86 (0571) 8700-6292 Email: support@acesight.com support@visionaid.co.uk Visit us at www.acesight.com...
Need help?
Do you have a question about the Acesight VR and is the answer not in the manual?
Questions and answers