ECOSAFE MC60 Instruction Manual

ECOSAFE MC60 Instruction Manual

Safety cabinet

Advertisement

Quick Links

Range 2 – MC60
Operating instructions
Instruction manual
For safety cabinet
Model MC60
ECOSAFE | Date du document : 29/04/2019 – Version : 01
0

Advertisement

Table of Contents
loading

Summary of Contents for ECOSAFE MC60

  • Page 1 Range 2 – MC60 Operating instructions Instruction manual For safety cabinet Model MC60 ECOSAFE | Date du document : 29/04/2019 – Version : 01...
  • Page 2: Table Of Contents

    Page 3 Storage Page 3 Ventilation Page 3 Safety controls Page 4 Spare parts Page 5 Recycling Page 5 Warranty Page 5 Control sheet for the user Page 7 ECOSAFE | Date du document : 29/04/2019 – Version : 01...
  • Page 3: Description / Use

    That it is not exposed to any heat source ▪ That it is protected against moisture and that the ambient temperature of the location is neither less than 5°C, nor more than 40°C ECOSAFE | Date du document : 29/04/2019 – Version : 01...
  • Page 4: Internal Equipments

    The air renewal has to be at least 10 times the volume of the cabinet, per hour. Moreover, ensure that the ventilation runs 24h/7. Connection to a ventilation system The air inlet and outlet are situated on the side of the cabinet. See the schema below. ECOSAFE | Date du document : 29/04/2019 – Version : 01...
  • Page 5: Safety Controls

    “Safety cabinet not connected to the mechanic ventilation” (etiquette is not provided). 7. SAFETY CONTROLS Your safety cabinet is a safety equipment. As to guarantee its perfect efficiency, you have to check the equipment regularly. ECOSAFE | Date du document : 29/04/2019 – Version : 01...
  • Page 6: Spare Parts

    In case of a damage of the equipment by the user or a third party The equipment had a modification or a repair by the user or a third party, without any prior written authorization by ECOSAFE In case of a bad use of the equipment In case of a normal attrition of the equipment ECOSAFE | Date du document : 29/04/2019 –...
  • Page 7 The activation of the warranty won’t extend the term. Our warranty stops if the customer has not notified us in a 7 days term after seeing the fault ; date that the customer has to prove. ECOSAFE | Date du document : 29/04/2019 – Version : 01...
  • Page 8: 11. Control Sheet For The User

    The standardized pictogram on the door is in good condition and visible The door hinges are lubricated The locking system is lubricated The containment sump is clean Remarks : Date : By : Signature ECOSAFE | Date du document : 29/04/2019 – Version : 01...

Table of Contents