Selecting The Recording Mode - Silvercrest KH 2450 Operating Instructions Manual

6
Select, by pressing the function button B
quently select, by pressing the function button D
the programming Menu is once again shown. To return to the start screen: Se-
lect, by pressing the function button A

8.11 Selecting the recording mode

This voice recorder can record dictations with three varying sampling rates. The
higher the sampling rate, the better the quality of the dictation recording; however,
at the same time, the requirement for memory space for dictation recording rises
accordingly.
Selection can be made from three sampling rates for dictations recordings:
»HP« – highest quality level, dictations require a lot of memory space
Ú
»SP« – standard quality level; optimal compromise between the demands on
Ú
quality and memory space
»LP« – lowest quality level; dictations require very little memory space; recom-
Ú
mended for very long dictations
From the factory, »SP« is set as the sampling rate. To change the setting of the sam-
pling rate:
1
Switch the voice recorder on by pressing the button »ON/OFF«
As soon as the start screen is shown in the display
2
Place the multi-function slider
3
Then select, by pressing the function button D
In the display
46
is indicated:
q
Delete
Folder
No./Ref.
OK
or C
e
twice in succession, »ESC«.
w
at » STOP«.
h
t
, »Off« or »Auto«. Subse-
r
, »OK«. In the display
t
a
:
q
, »Menu«.
ESC
q
.