Related Manuals for Optimus UMX-TEL
Summary of Contents for Optimus UMX-TEL
- Page 1 UMX-TEL DTMF Telephone interface card for UMX-03/0 audio matrix (ASIA VERSION) UMX-TEL version 4.3.000AS...
-
Page 3: Table Of Contents
SOFTWARE AND FIRMWARE VERSIONS ..........................13 DOCUMENT VERSION TRACKING ............................13 GUARANTEE ..................................14 WARNING. This is a Class A unit. In a domestic environment this unit may cause radio interferences. In this case the user must take the necessary precautions. UMX-TEL version 4.3.000AS... -
Page 5: General Information
CONFIG. button. This is used to configure the parameters of the card. 3. CONFIGURATION OF THE SYSTEM Once it has been inserted in the chassis, the UMX-TEL card must be configured before it is used. The UMX-TEL card has two distinct types of configuration: The first configuration, which we will call Configuration of the card, assigns the basic parameters for the operation of the card in the PA system: Name of the card, input number, etc. -
Page 6: Configuration Of The Card
The parameters of the card can be configured by using a PC connected to the UMX-03/0, using the P.A. Manager software. Open the application from the server PC. On the installations screen, edit or add a UMX-TEL card and configure the parameters of the input. •... -
Page 7: Configuration Of The Call
This configures the number of tones after which the card will answer when a call is made to broadcast a message (between 1 and NB: In the case of the configuration call, the card always answers after two call tones. • PARAMETER 5: DEBUG MODE. Set this parameter to 0 (debug mode OFF). UMX-TEL version 4.3.000AS... - Page 8 To avoid this, the system includes the hanging up forcing functionality, by pressing “1”. By pressing the “1” key, the telephone is hanged up, independently from the assigned values to parameter 8 (hanging up tone detection time) and to parameter 10 (communication time). UMX-TEL version 4.3.000AS...
-
Page 9: Factory Configuration
Debug Noise gate Communication the zones or DTMF “1” tone Without password after 2 call mode OFF groups detection detection: deactivated time: 30 s. tone previously (hanging up 350ms defined when pressing 1): configuring the 120ms card. UMX-TEL version 4.3.000AS... -
Page 10: Call Configuration Process
2. Dial the telephone number (or extension) corresponding to the UMX-TEL telephone adaptor from a tone dial telephone. The unit will answer on the second call tone, the CONFIG. LED will remain lit and three different tones will be heard through the telephone receiver. -
Page 11: Configuration Example And Sending An Announcement
A long tone will be heard. Speak after this tone. You have 30 seconds to broadcast the announcement. To end the announcement, hang up the telephone or press “1”. UMX-TEL version 4.3.000AS... -
Page 12: Inserting The Card
4) Reconnect the power. Figure 5 ATTENTION: If the UMX-03/0 audio matrix has any card configured with micro sensitivity, 2 slots must be left between these cards and the UMX-TEL card. UMX-TEL version 4.3.000AS... -
Page 13: Technical Specifications
Parameter 6 changed from 3 to 4 digits. Parameter 8: Changing the hanging tone detection times. 4.3.000AS 21-06-2019 3.2.2. Factory configuration. R+D Department (ASIA VERSION) 6. Technical specifications. 7. Software and firmware versions. Approved by Position Date Ferran Gironès i Puig R+D Director 21/06/2019 UMX-TEL version 4.3.000AS... -
Page 14: Guarantee
In the event that the guarantee rights do not to present the original purchase invoice or the guarantee certificate. apply, OPTIMUS S.A. shall duly inform the client. If, within a period of 6 weeks 2. GUARANTEE PROVISIONS from this communication, no written repair order is received from the client confirming acceptance of the costs, OPTIMUS S.A.
Need help?
Do you have a question about the UMX-TEL and is the answer not in the manual?
Questions and answers