Summary of Contents for CATCHPOLE & RYE The Mercantile Ladder
Page 1
INSTALLATION GUIDE e Mercantile Ladder Towel Rail STANDARD, DUAL FUEL & ELECTRIC MODELS YOU WILL NEED - Pair of Radiator valves for Dual Fuel or Standard Models (sold separately). - Screwdriver - Pipe Cutter - Spanner - 15mm Olive - Suitable PTFE Tape GENERAL INFORMATION This product is manufactured entirely in the UK and has been rigorously tested to provide many years of good service when installed by a suitably qualified professional.
Page 2
INSTALLATION GUIDE e Mercantile Ladder Towel Rail STANDARD, DUAL FUEL & ELECTRIC MODELS SECTION 1: Wall Fixings - Applies to all models After the towel rail has been thoroughly inspected and Ensure that there are no wires or pipes behind the marked carefully unpackaged measure the fixing points on the wall locations for the fixings.
Page 3
INSTALLATION GUIDE e Mercantile Ladder Towel Rail STANDARD, DUAL FUEL & ELECTRIC MODELS SECTION 2: Connecting to power supply - Applies to Electric and Dual Fuel Models. Thread electric supply cable through the hollow leg and Attach the rail to the wall using the fixings inserted in section attach to the element.
Page 4
INSTALLATION GUIDE e Mercantile Ladder Towel Rail STANDARD, DUAL FUEL & ELECTRIC MODELS SECTION 3: Connecting to central heating systems - Applies to Standard and Dual Fuel Models. Ensure that the 15mm feed pipes are aligned correctly for Fit the radiator valve tail thread using an appropriate allen fitting to the radiator valves.
Page 5
INSTALLATION GUIDE e Mercantile Ladder Towel Rail STANDARD, DUAL FUEL & ELECTRIC MODELS SECTION 3: Connecting to central heating systems - Applies to Standard and Dual Fuel Models. Attach the feed pipes to the radiator valves using the Position the escutcheon and pipe cover so that they are in compression olives and nut.
Need help?
Do you have a question about the The Mercantile Ladder and is the answer not in the manual?
Questions and answers