EN 10
4.
LC4.9E AA
4.3.3
Side I/O Panel
After removal of the Speaker Compartment Covers, this panel
is accessible.
1. Disconnect the cable (1) from the panel.
2. Remove the T10 mounting screws [2] that hold the assy.
3. Remove the panel from its bracket [3], by pushing against
the front side of the side I/O cinch connectors.
1
2
Figure 4-6 Side I/O panel removal
When it is defective, replace the whole unit.
Mechanical Instructions
3
F_15430_048.eps
4.3.4
LED Panel
1. Remove the fixation screws (1) and take the panel out of its
brackets.
2. Disconnect the cable (2) from the panel.
4.3.5
Keyboard Control Panel
100605
Figure 4-8 Keyboard control panel
1. Remove the panel (1) from its three brackets (2).
2. Disconnect the cable (3) from the panel.
1
2
Figure 4-7 LED panel
2
F_15420_036.eps
070605
1
3
F_15420_037.eps
070605