Table of Contents
Advertisement
Specifications
Model
Engine type
Dimensions (L x W x H)
Weight
Bore x stroke
Displacement
Fuel/oil ratio
Carburetor type
Fuel tank capacity
Ignition
Spark plug
Electrode Gap
Torque
Air cleaner type
Starting method
Stopping method
Transmission type
Cooling System
Blade Length
Cutter Drive
Gear Lubricant
Idle Speed
Clutch Engagement Speed
Wide Open Throttle Speed (W.O.T.)
Specifications are subject to change without notice.
This spark ignition system complies with the Canadian standard ICES-002.
Emission Control (Exhaust & Evaporative)
EPA 2010 and Later and/or C.A.R.B. TIER III
The emission control system for the engine is EM/TWC (Engine Modification and 3-way Catalyst) and for the fuel tank
the Control System is EVAP (Evaporative Emissions) or N (for nylon tank). Evaporative emission may be applicable to
California models only.
An Emission Control Label is located on the unit. (This is an EXAMPLE ONLY; information on label varies by en-
gine FAMILY).
PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)
The 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine
emissions output meets applicable emissions regulations, provided that approved maintenance procedures are
followed as listed in the Maintenance Section of this manual.
1682 mm (66.2 in) x 248 mm (9.76 in) x 245 mm (9.6 in)
50:1 with *ISO-L-EGD or JASO FD class engine oil
Automatic, centrifugal clutch w/bevel gear
IMPORTANT!
AHS242
2-cycle, air cooled, vertical cylinder
5.99 Kg (13.2 lb)
33 x 28 mm/1.3 x 1.1 in.
23.9 cm
/1.46 cu. in.
3
Diaphragm-type
.69 L / 23.3 fl. oz.
One-piece electronic, C.D.I.
NGK BPMR8Y
0.6 mm/ .024 in.
150-170 kgf cm / 130 - 150 in • lbf
Non-reversible double layer felt
Recoil
Slide switch
Forced Air
568 mm/22.4 in.
Spur Gear
Lithium Based Grease
3,000 RPM
4,000 RPM
11,800 RPM
7
Advertisement
Table of Contents
