ECOSAFE S1204T Instruction Manual

ECOSAFE S1204T Instruction Manual

For safety cabinet

Advertisement

Quick Links

Range 5 – S1204T
Operating instructions
Instruction manual
For safety cabinet
Model S1204T
ECOSAFE | Date du document : 30/04/2019 – Version : 01
0

Advertisement

Table of Contents
loading

Summary of Contents for ECOSAFE S1204T

  • Page 1 Range 5 – S1204T Operating instructions Instruction manual For safety cabinet Model S1204T ECOSAFE | Date du document : 30/04/2019 – Version : 01...
  • Page 2: Table Of Contents

    Page 3 Storage Page 3 Ventilation Page 3 Safety controls Page 4 Spare parts Page 5 Recycling Page 5 Warranty Page 5 Control sheet for the user Page 7 ECOSAFE | Date du document : 30/04/2019 – Version : 01...
  • Page 3: Description / Use

    That it is not exposed to any heat source ▪ That it is protected against moisture and that the ambient temperature of the location is neither less than 5°C, nor more than 40°C ECOSAFE | Date du document : 30/04/2019 – Version : 01...
  • Page 4: Internal Equipments

    The air renewal has to be at least 10 times the volume of the cabinet, per hour. Moreover, ensure that the ventilation runs 24h/7. Connection to a ventilation system The air inlets are situated on the side of the cabinet, and the air outlet on the top. ECOSAFE | Date du document : 30/04/2019 – Version : 01...
  • Page 5: Safety Controls

    “Safety cabinet not connected to the mechanic ventilation” (etiquette is not provided). 7. SAFETY CONTROLS Your safety cabinet is a safety equipment. As to guarantee its perfect efficiency, you have to check the equipment regularly. ECOSAFE | Date du document : 30/04/2019 – Version : 01...
  • Page 6: Spare Parts

    In case of a damage of the equipment by the user or a third party The equipment had a modification or a repair by the user or a third party, without any prior written authorization by ECOSAFE In case of a bad use of the equipment...
  • Page 7 The activation of the warranty won’t extend the term. Our warranty stops if the customer has not notified us in a 7 days term after seeing the fault ; date that the customer has to prove. ECOSAFE | Date du document : 30/04/2019 – Version : 01...
  • Page 8: 11. Control Sheet For The User

    The standardized pictogram on the door is in good condition and visible The door hinges are lubricated The locking system is lubricated The shelves and the containment sump are clean Remarks : Date : By : Signature ECOSAFE | Date du document : 30/04/2019 – Version : 01...

Table of Contents