Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for OYPLA DIY 4642
- Page 1 User Manual Garage Stool USER MANUAL Model No: 4642...
- Page 2 Clean only with a damp cloth. Do not use strong industrial cleaning substances or abrasive materials as these will damage the product. Do this regularly to keep the product clean of any oil or grease. If the product is damaged or has any defects, please contact cservice@oypla.com USER MANUAL Model No: 4642...
- Page 3 Screw for Seat Please be aware that you will be referring to this parts list throughout the assembly Nut for Saddle Nut for Wheel process. Washer Plastic Saddle Steel Unit Screw for Saddle Rear Caster Wheel Trasome USER MANUAL Model No: 4642...
- Page 4 (2). Secure in place with the 2 remaining screws (3), located on the underside of the seat. You should require allen key for this step. Please see pictures to help. Red arrows show where the screws should go. USER MANUAL Model No: 4642...
- Page 5 3) Lastly, take 1 nut for the wheel and 1 wheel (10). As seen on the image, the nut is at the top and the wheel is at the bottom. Feed the wheel through the pre- drilled hole and secure in place using the nut.
Need help?
Do you have a question about the 4642 and is the answer not in the manual?
Questions and answers