Hydro HYDR8 User Manual

1. Remove cap & turn on by pushing gray button
2. Press the metal rods firmly onto your skin/cheek/forehead
3. Read analysis chart on the back of the unit
HYDR8 detects oil, water, and cellular levels to help balance your skin correctly. It gives an actual reading of your
skin to reveal what you cannot see with the naked eye. Using state of the art technology, "Bio-Impedance Analysis
(BIA)" to measure water, oil, and skin density, you can use the appropriate beauty products, cleaning methods,
and diet to help achieve the balance needed for healthy skin. The HYDR8 is compact and portable, perfect for
everyday use.
A) HYDR8 provides an assessment of your skin. Your face has different ratings on the
cheek, forehead, and chin. This will guide you to use the proper products and diet
to find a balance to your skin.
B) How to operate:
1. Twist and open the battery cap. Put two L1154 batteries in with (+) end facing battery cap, turn and close the
battery cap. All the symbols will be turned on momentarily to ensure all parts of the LCD is functioning properly.
2. Press the gray button. The icons on the LCD display will be lit up from left to right. Then, a 'Beep' signal will be
heard and the symbols will be flashing to indicate that the HYDR8 is ready to measure the skin.
3. Place the two contacting rods firmly onto your cheek/forehead, then press the gray button and you will hear a
'Beep' which indicates that HYDR8 is analyzing, hold position for about 10 seconds. Another "Beep" will indicate
measurement has completed. Now you can read the scores, by turning over the unit (chart reference on back of
unit).
* To reanalyze, start each operation again from step 2.
* The automatic shut-off function will activate after the screen flashes 15 times, if next measurement is not taken.
Page 1
HYDR8 Skin Scanner User Manual
3 Easy Steps to let you know the condition of your skin:
holding in place until it beeps twice
EPICUREANIST © COPYRIGHT 2013

Water
Oil
Cells