Page 1
USB devices. Product Introduction The latest ANCEL 3-in-1 led work light displays the remaining power status at any time and has 5 lighting modes, with a waterproof coefficient of up to IP65, which can be used for moving lights in the car, outdoor camping and emergency charging treasures to meet your outdoor lighting needs and accompany your safety.
Page 2
What’s in box? 1* Work Light 1* USB Cable 1* User Manual 1* Carabiner 1.Lable position 6.Bracket 2.Power/Lighting color switch 7.Hook 3.Battery indicator 8.Magnets 4.USB output/Type-C input 9.Tripod hole 5.Higher/Lower lighting mode button Operate Step Instruction: Step 1: ON/OFF Press and hold the power button for 3 seconds to turn on& off. Note: The default light mode is cold white (high brightness) when turn on the lights, and short press the button again to toggle from cold white-warm light-daylight -SOS -red light modes...
Page 3
Step 2: Brightness setting By long pressing the +/- button, you can dim continuously in each lighting mode to choose the right brightness you need. Step 3: USB charging port Plug the USB charging cable into the Type-C port to charge your device. The charging power is DC 5V/2A.
Page 4
4. Do not immerse the light in water. 5. Keep away from fire and high temperature. 6. Do not drop, knock, throw or shake the fixture as this may damage the components inside. 7. Do not attempt to disassemble, modify or repair the device yourself. 8.
Need help?
Do you have a question about the M3 and is the answer not in the manual?
Questions and answers