Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Knightsbridge LEDM07B
Summary of Contents for Knightsbridge LEDM07B
- Page 1 INSTALLATION & MAINTENANCE MANUAL LEDM07B / LEDM07W...
- Page 2 These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following products: LEDM07B / LEDM07W SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
- Page 3 ole in the mounting surface as per the cut-out details (see Fig.1) ensuring not to joists, gas/water pipes or electrical cables Fig. 1 Cut-out with sleeve Cut-out without sleeve 60mm 50mm • We recommend not installing in areas where there is a high risk of flooding or areas where water may sit on top of the fitting (see Fig.
- Page 4 • There must be enough cable below the luminaire to carry out maintenance work (see Fig. 3) Fig. 3 • Connect the luminaire to the mains supply ensuring the correct polarity is observed L - Live (brown), E - Earth (green/yellow), N - Neutral (blue).
- Page 5 GENERAL The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire should be replaced. Clean the external surfaces with a damp cloth using a mild solution of detergent and warm water only, do not use aggressive cleaning products or solvents which may damage the product.
- Page 6 INTERNAT CONTACT D INTERNATIONAL CONTACT DETAILS ML Accessories Limited LU5 4LT www.mlaccessories.co.uk DCJUL21_V3...
Need help?
Do you have a question about the LEDM07B and is the answer not in the manual?
Questions and answers