SAFETY REGULATIONS In order to avoid risks for the user’s and other • If the original connector cable is worn or people’s safety, as well as annulling the warranty, damaged, it must be replaced with another of it is advisable to read the suggestions in this section the same type (in perfect condition).
SYSTEM DESCRIPTION The target of this device is to identify macroscopic connect a single speaker to one connector on the damages (like disconnected wires, blown coils, device via a short link cable, select the measurement etc...) for each way of the Outline speakers quickly preset and push the “MEASURE”...
FRONT PANEL LOUDSPEAKER FAST QUALITY CONTROL A FASTQC-LS OUTLINE Spk Tester SHORT CIRCUIT SHORT CIRCUIT FAULT FAULT LK8 CONNECTOR LK8 CONNECTOR NL4 CONNECTOR 1+/1- 2+/2- NL4 CONNECTOR MEASURE BACKLIGHT 1) POWER EXCLUSION: connects and • preset, the name of each way and, during disconnects the battery.
DEVICE USE 1. Power up: after checking the presence of the is measured and compared to the limits saved battery and its good condition switch the power in the measurement preset. If the detected value is within the limits, the green LED of exclusion button(1) in the active position.
Page 8
Outline carries out on-going research for product improvement. New materials, manufacturing methods and design upgrades are introduced to existing products without prior notice as a routine result of this phi- losophy. For this reason, any current Outline product may differ in some aspect from its description, but will always equal or exceed the original design specifications unless otherwise stated.
Need help?
Do you have a question about the FASTQC-LS and is the answer not in the manual?
Questions and answers