Ez Setup; Channel Setup - Sharp LC 19SK25U Operation Manual

Basic adjustment settings

EZ Setup

You can run EZ Setup again, even after setting up the
preset channels.
Language setting
Select from among 3 languages: English, French and
Spanish.
Press MENU to display the MENU screen, and
1
then press c/d to select "Setup".
Press a/b to select "EZ Setup", and then
2
press ENTER.
Press a/b to select the desired language
3
listed on the screen, and then press ENTER.
Antenna setting
Make sure what kind of connection is made with your
TV when selecting "Air", "Cable(STD)", "Cable(HRC)" or
"Cable(IRC)".
Press a/b to select "Air", "Cable(STD)",
4
"Cable(HRC)" or "Cable(IRC)". Press ENTER
to enter the setting.
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
When "Air/Cable" has been selected in
5
Antenna setting and then press ENTER
again.
Press a/b to select "Analog & Digital" to
search both analog and digital broadcasts or
"Analog" to search only analog broadcasts or
"Digital" to search only digital broadcasts, and
then press ENTER,and select "Yes".
• The Channel search will start automatically.
• To exit the Channel search screen, press
RETURN.
Press MENU to exit.
6
• If no channel is found, confi rm the type of connection made
with your TV and try EZ Setup again.
24

Channel Setup

If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Antenna setting
Press MENU to display the MENU screen, and
1
then press c/d to select "Setup".
Press a/b to select "CH Setup", and then
2
press ENTER.
Press a/b to select "Air/Cable", and then
3
press ENTER.
Press a/b to select"Air", "Cable(STD)",
4
"Cable(HRC)" or "Cable(IRC)", and then press
ENTER to enter the setting.
Press MENU to exit.
5
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
Repeat steps 1 to step 4 in Antenna setting in
1
Channel Setup.
Press a/b to select "CH Search", and then
2
press ENTER.
When "Air/Cable" is selected in Antenna
3
setting:
Press a/b to select "Analog & Digital" to
search both analog and digital broadcasts or
"Analog" to search only analog broadcasts or
"Digital" to search only digital broadcasts, and
then press ENTER,and select "Yes".
• The Channel search will start automatically.
• To exit the Channel search screen, press
RETURN.
Press MENU to exit.
4
• If no channel is found, confi rm the type of connection made
with your TV and try channel search again.