Table of Contents
Advertisement
operation
7 Basic operation
operation
7.1 Switching on the appli-
ance
Electrically connect the appliance.
1.
→ Page 12
a The appliance begins to cool.
Set the required temperature.
2.
→ Page 17
7.2 Operating tips
¡ Once you have switched on the
appliance, the set temperature is
only reached after several hours.
Do not put any food in the appli-
ance until the set temperature has
been reached.
¡ The front and side panels of
the housing heat up occasionally.
This prevents condensation from
forming.
¡ When you close the door, a va-
cuum may be created. The door is
then difficult to open again. Wait a
moment until the vacuum is offset.
7.3 Switching off the appli-
ance
Disconnect the appliance from the
▶
power supply. Unplug the appli-
ance from the mains or switch off
the circuit breaker in the fuse box.
7.4 Setting the temperature
Setting the refrigerator
compartment temperature
Press
(Refrigerator compart-
▶
ment) repeatedly until the temper-
ature display shows the required
temperature.
The recommended temperature in
the refrigerator compartment is
4 °C.
Setting the freezer compartment
temperature
Press
(Freezer compartment) re-
▶
peatedly until the temperature dis-
play shows the required temperat-
ure.
The recommended temperature in
the freezer compartment is
−18 °C.
8 Additional functions
8.1 Super cooling
With Super cooling, the refrigerator
compartment cools as cold as pos-
sible.
Switch on Super cooling before pla-
cing large quantities of food.
Note: When Super cooling is
switched on, increased noise may
occur.
Switching on Super cooling
Press
(Refrigerator compart-
▶
ment) repeatedly until
up.
Note: After approx. 2 hours, the ap-
pliance switches to normal operation.
Switching off Super cooling
Press
(Refrigerator compart-
▶
ment) repeatedly until the temper-
ature display (refrigerator compart-
ment) shows the required temper-
ature.
operation en
lights
17
Advertisement
Table of Contents
