Advertisement
Advertisement
Table of Contents
Summary of Contents for CPAP 20ZDPO2
- Page 1 USER MANUAL Universal Rechargeable CPAP Battery Model: 20ZDPO2 Page 1 of 5...
- Page 2 4. Determine Exact CPAP Run Time: Test the run time with your exact settings first before sleeping with it. At the end of the CPAP hose, remove mask and put paper towel inside the CPAP hose. Turn the machine on and just let a little air through.
- Page 3 1. PRODUCT CONTENT 1. Zopec Voyage Universal Rechargeable CPAP Battery 2. Fast USB-C PD 39W Wall Charger 3. Travel Pouch 2. PRODUCT DIAGRAM 1. Safety Cover 2. AC Outlet 3. AC Switch On/Off (press and hold to turn On/Off. LED lights when it is On) 4.
- Page 4 • Plug in your device and the device should turn on and be ready for use. • After use, just press and hold the AC Outlet Switch to turn off (LED turns off). 5. CPAP Run Time: (Not using humidifier and heated tube. BiPap time around 10 - 20% less)
- Page 5 • Device Will Not Run and All 4 LED Lights Flashing: Please make sure that the device you are plugging in is below 100 W. All CPAP machines are 90W or below. You can see the rating on the AC Adaptor. If it is, please unplug your device and try again.
Need help?
Do you have a question about the 20ZDPO2 and is the answer not in the manual?
Questions and answers