Summary of Contents for MMcall T10
- Page 1 User Manual Staff/Server Paging System T10 Transmitter & NC8/NS8 Pagers (855) 638-2034 | www.MMCallUS.com...
-
Page 2: Table Of Contents
Change Display Timeout ................10 Change Vibration Length ................11 Troubleshooting ..................12 If Pager does not Receive Pages ..............12 Check the Power Supply ................12 Charging Check ..................13 USER MANUAL | T10 & NC8/NS8 MMCallUS.com | 1... - Page 3 What to do if the system malfunctions? ............ 13 System Repair after Warranty Expiration ..........13 Ordering Additional Pagers ............... 13 Product Specifications ................13 Warranty ....................14 FCC Interference Statement ............... 14 USER MANUAL | T10 & NC8/NS8 MMCallUS.com | 2...
-
Page 4: Setup And Use
• To wake up the pager from display sleep, hold the RIGHT arrow for 1 second. Pager Charger Plug cable into charging dock for watches, and directly into beepers (see page 8-9). USER MANUAL | T10 & NC8/NS8 MMCallUS.com | 3... - Page 5 How to use the Transmitter? F1: Home Screen F4: Settings SEND: Call Pager *<- : Delete # S : Numeric / Capitalize / Loser Case USER MANUAL | T10 & NC8/NS8 MMCallUS.com | 4...
-
Page 6: Call A Pager
ENT after inputting the pager number. To add to the preset message (i.e. Instead of "Example 1" to read "Example 1 ASAP") have Example 1 chosen, then press ENT again instead of SEND. Use the # USER MANUAL | T10 & NC8/NS8 MMCallUS.com | 5... -
Page 7: Call All Pagers
Call All Pagers 1. When calling all staff/server, enter 99 and press SEND: Transmitter Settings Press F4 in the bottom right corner. Enter 1234 as the password, and then press ENT. USER MANUAL | T10 & NC8/NS8 MMCallUS.com | 6... -
Page 8: Change Transmitter Time
ESC to leave that menu. Scroll up or down to change Message 2-9. b. Note: to send completely custom messages later (i.e. without preset words) one of these 9 messages must remain blank. USER MANUAL | T10 & NC8/NS8 MMCallUS.com | 7... -
Page 9: Turn On/Off The Beepers/Watches
Charge Pagers To charge the watch, place on the charging square with the pins going into the connectors on the bottom of the watch. Pager should say "Charging..." USER MANUAL | T10 & NC8/NS8 MMCallUS.com | 8... - Page 10 (4) and use LEFT arrow to change to 5. Password should read 1235. Press OK. Change Pager Time 1. See “1-Clock Setup” as the first menu item. Press OK when option is highlighted. USER MANUAL | T10 & NC8/NS8 MMCallUS.com | 9...
-
Page 11: Change Display Timeout
1. This will change how long the display stays on before going dark (but not turning off the pager completely). 2. Use the RIGHT arrow to scroll through menu to “2-Disp Timeout”. Press OK when option is highlighted. USER MANUAL | T10 & NC8/NS8 MMCallUS.com | 10... -
Page 12: Change Vibration Length
1. This will change how long the pager will vibrate for after receiving the message. 2. Use the RIGHT arrow to scroll through menu to “3-Vibration”. Press OK when option is highlighted. USER MANUAL | T10 & NC8/NS8 MMCallUS.com | 11... -
Page 13: Troubleshooting
2. Be sure transmitter power is plugged in and display is lit. If display is blank, check power supply as described below. If display is lit, check transmitter functions described below. USER MANUAL | T10 & NC8/NS8 MMCallUS.com | 12... -
Page 14: Check The Power Supply
Should your paging system ever fail to function properly, refer to the previous troubleshooting section. If you’ve followed all the steps and requirements and your system is still inoperable, you may call MMCall at (855) 638-2034 Monday through Friday 9:00 am to 5:00 pm Eastern Time. -
Page 15: System Repair After Warranty Expiration
Dimensions: 9” x 5” x 1.5” Warranty MMCall warrants this product against any defects that are due to faulty material or workmanship for a one-year period after the original date of consumer purchase of the complete paging system (transmitter, pagers, and charger). -
Page 16: Fcc Interference Statement
- Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment. USER MANUAL | T10 & NC8/NS8 MMCallUS.com | 15... - Page 17 (855) 638-2034 1444 Biscayne Blvd, Miami, FL 33132 www.MMCallUS.com USER MANUAL | T10 & NC8/NS8 MMCallUS.com | 16...
Need help?
Do you have a question about the T10 and is the answer not in the manual?
Questions and answers