LITELOK ONE MOTO 108 Instructions

YOU SHOULD HAVE RECEIVED
1 LITELOK®
2 KEYS 2 WRAPSTRAPS
HOW TO OPERATE YOUR LITELOK®
OPENING YOUR LITELOK®
!WARNING!
DO NOT LEAVE
THE KEY IN THE
LOCK. IF YOU
ACCIDENTALLY
DROP THE
LOCK & IT LANDS
ON THE KEY,
IT CAN DAMAGE
THE LOCK/KEY
LOCKING YOUR LITELOK®
REVERSE SEQUENCE TO LOCK
There is a slight knack to
opening Litelok which,
once you've got it, becomes
second nature.
We suggest that you practice
using Litelok a few times before
taking it out with your bike.
USING YOUR LITELOK® KEYS
LITELOK ONE has been designed to be quick and easy
to use. DO NOT FORCE the key if the lock jams and ALWAYS
push the key in fully before turning 180º clockwise.
If you have trouble it might be because the key was not
fully inserted. Wiggle the key gently, side to side and turn
anticlockwise, remove and try again. If any issue persists
please contact the place of purchase.
KEEP ONE AS SPARE and take note of the key code to
enable you to order replacements if required at a later date.
TWIN LITELOK® ONE MOTO
You will have two sets if you
have a TWIN LITELOK®
You can use the same key on
both locks and connect them
together in series (as shown)
or in parallel (e.g. front
wheel/back wheel) for extra
security.
FULLY INSERT KEY (*)
2
3
4
HOLD LITELOK FIRMLY &
5
TURN THE TWO ENDS IN
WARNING: KEEP HANDS AWAY FROM
CLOSE LINE TO AVOID PINCHING
6 SNAP LITELOK SHUT
YOU DO NOT NEED THE
7
KEY TO CLOSE YOUR LITELOK
DO NOT LEAVE KEY IN LOCK
CARING FOR YOUR LITELOK®
Wipe all surfaces with a soft cloth and a small amount of soapy
water if required. Dry well and avoid introducing water into the
locking mechanism. Lubricate with a small amount through key
hole periodically. LITELOK is supplied with an aerospace-rated
anti-corrosion protection coating and has been designed to
resist dirt and corrosion but we recommend drying if it gets
wet. This coating should last a year and you can reapply with
a proprietary product.
Please contact us for recommendations.
PLEASE DO NOT USE
LITELOK® AS A WEAPON
ROTATE THE KEY A
HALF TURN (180º)
CLOCKWISE
OPEN THE LITELOK KEEPING
THE LOCK PART STRAIGHT
LITELOK WILL NATURALLY
SPRING OPEN READY TO USE
LITELOK® ONE MOTO SPECIFICATION
LITELOK® 108 TWIN 108
1.46kg
Weight 3.21lb 2x 1.46kg
Length 107.5cm
42.3in 2x 107.5cm
Locking
103.5cm 40.7in
2x 103.5cm
Circumf-
erence
Width 5cm 1.9in
5cm
• Hardened steel lock casings
• Pick resistant disc detainer style lock mechanism
• Patented in-line lock clicks to lock without the key,
and allows multiple locks to be joined together
for extra length
• Patented BOAFLEXICORE® strap composite strap
employing high tensile steel in a polymer matrix
• Hard wearing outer sleeve & soft neoprene skin with
retro reflective print
• Each single Litelok® supplied with 2 keys &
2 WrapStraps
• Many options for carrying; rattle-free design makes
no noise when carried on the motorcycle
I N S T R U C T I O N S
2x 3.21lb
2x 42.3in
2x 40.7in
1.9in