WhisperPower Piccolo WP50ARM Touch Display displays Generator data. Please read this manual carefully and follow these instructions for installation, configu- ration, and usage of the WhisperPower Piccolo WP50ARM in order to ensure optimal performance. 1.1. Firmware Revision This manual corresponds to WP50ARM PICCOLO firmware revision 1.2.
2.4. Checking Connections Once the connection to the generator have been completed, power can be supplied to the WhisperPower Piccolo WP50ARM Touch Display. Check to see that information is being properly transmitted by observing the GENERATOR screen. Refer to Section 4, “Troubleshooting”, if no information appears.
Configuring the WhisperPower Piccolo WP50ARM Touch Display As shipped from the factory, the WhisperPower Piccolo WP50ARM Touch Dis- plays don’t require any special configuration and will work for most applications. Configurations with more than one WhisperPower WP50ARM display is possible, for these special configurations please contact WhisperPower.
WhisperPower Piccolo Touch Display 3.1.1. GENERATOR screen On the Generator screen the generator status is shown. The generator can be turned on and off. The output voltage, current, power and RPM is shown together with the historical and maintenance runtimes. Further the starter battery voltage is shown.
On the Maintenance screen the User Level of the WP50ARM can be set from User to Expert and Installer. These User Levels are protected by password to ensure proper setting of the WP50ARM installation. 3.3. System screen On the system screen a button is provided to reboot the WhisperPower Piccolo WP50ARM Touch Display.
WhisperPower Piccolo Touch Display 3.4. Language screen On the language screen a dropdown (English/German/Dutch) is provided to set the WhisperPower Piccolo WP50ARM Touch Display language. 3.5. Display screen On the Display screen settings are provided for the screensaver and the dim- ming of the screen.
Hi RPM Exhaust Temp AC Under Voltage Low RPM Start Fail Over Temperature Inspect Engine Communication Over Speed Parameters Vdriver Low Missing Phase RPM Over Speed Refer to the WhisperPower Piccolo manual for more information on alarms and warnings. Dimensions WP50ARM...
Value Operating Temperature -25°C to 55°C Appendix Wrong operation of the WhisperPower Piccolo WP50ARM Touch Display may lead to hazardous situations. Technical Support If you require technical support for WhisperPower products, you can reach us in any of the following ways: Telephone: +31 (0) 512 571 550 E-mail: sales@whisperpower.com...
Page 12
E n j o y G r e e n E n e r g y WhisperPower BV Kelvinlaan 82, 9207 JB Drachten The Netherlands www.whisperpower.com sales@whisperpower.com...