Advertisement
Quick Links
User's manual
Outdoor Enclosure 6 × 3 × 1.8 m
62844
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.
Advertisement
Related Manuals for WilTec Fudajo 62844
Summary of Contents for WilTec Fudajo 62844
- Page 1 User’s manual Outdoor Enclosure 6 × 3 × 1.8 m 62844 Illustration similar, may vary depending on model Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further developments.
- Page 2 The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man- ual, nor in the diagrams and illustrations shown.
- Page 3 M8×50 screw M10×50 screw Self-tapping screw (M5.5×19) Safety lock Wire mesh Roof Wire tie Rubber rope Frame № Quantity Size (㎜) Figure 250 and 1310 1560 1765 © by WilTec Wildanger Technik GmbH Item 62844 Page 3 http://www.fudajo.com 04 2022-1...
- Page 4 1775 support Foot – – Tools (included): wrench, sockets – Tools (also required): drill, pair of pliers – Assembly time: approx. 1 hour (with 2 persons assembling) © by WilTec Wildanger Technik GmbH Item 62844 Page 4 http://www.fudajo.com 04 2022-1...
- Page 5 Loosen the two frame fasteners to be able to align the elements accurately. Step 2: assembling the frame Note! The door is designed to be mounted to the left side of a corner. © by WilTec Wildanger Technik GmbH Item 62844 Page 5 http://www.fudajo.com...
- Page 6 2. Attach the wire mesh to the door on the upper and lower parts using the wire tie. 3. Using a cordless screwdriver, insert the self-tapping screws into the corresponding pilot holes of the tubes and tighten them. This will help to stabilise the enclosure additionally. © by WilTec Wildanger Technik GmbH Item 62844 Page 6 http://www.fudajo.com...
- Page 7 The cloth-roof frame consists of 2 pieces of tube (4), 1 piece of tube (5), and 1 piece of tube (6) as well as two sets of two fasteners and screws. © by WilTec Wildanger Technik GmbH Item 62844 Page 7 http://www.fudajo.com...
- Page 8 Important Note: Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 62844 Page 8 http://www.fudajo.com 04 2022-1...