Advertisement
plans with all household members and do exercises regularly.
1: Inform all residents about the function of the smoke detec-
tor. Trigger the alarm signal with the test button and explain
what the alarm means.
2: Identify two exits from each room and an escape route from
each room exit to the outside.
3: Teach all residents to use an alternate exit if the door be-
comes unusable. Make it clear that hot or burning doors
must not be opened.
4: Teach all household members to crawl on the floor to stay
below hazardous smoke, fumes, and gases.
5: Designate a safe meeting place for all residents outside of
the building.
How to react in case of fire:
1. Do not panic, keep presence of mind!
2. Get out of the burning building as quickly as possible.
Check the temperature of a door before opening it. If the
door has a high temperature, leave the room through anoth-
er safety exit. Walk calmly, and do not try to take anything
with you.
3. Meet at the agreed meeting point.
4. Call the fire brigade immediately after leaving the scene of
the fire.
5. Never return to the burning building. Wait until the fire has
been extinguished.
Note: This information can help you to escape from the scene
of the fire. To generally reduce the risk of a fire, you should
carry out regular fire safety training.
Rectification of a fault
Do not under any circumstances disassemble the smoke detec-
tor components to stop the alarm while checking or in the
event of a false alarm. Immediately open the window or turn
on a fan to expel any harmless smoke that may be present.
Problem
You have pressed the
test
button,
but
alarm does not sound.
Note: When testing, press
and hold the test button for
at least 5 seconds.
The smoke detector beeps
once every 32 seconds and the
red LED flashes.
The alarm sounds
when cooking or
showering.
The alarm sounds, but not
in the form of a normal
check.
Warranty period of the smoke detector:
The warranty period for the smoke detector is limited to
3 years. The manufacturer provides a 3-year warranty from the
date of purchase. During this time, the manufacturer is respon-
sible for any technical problems that occur with the device.
After the warranty period has expired, the manufacturer is no
longer responsible for technical problems with the smoke de-
tector. If your smoke detector does not work properly within
the warranty period, return it to your dealer with a description
of the fault. Read the instructions for use completely and care-
fully before installing the smoke detector.
Determining the appropriate mounting locations:
· Install a smoke detector in the bedroom and on the escape
route. If there are more than one bedroom, install a smoke
detector in each bedroom.
· Also install a smoke alarm in the stairwell or on each floor.
· Mount the detectors in the middle of the ceiling so that the
alarm can be heard throughout the room.
· If the smoke detector cannot be mounted in the middle of
– 4 –
Document NO.:RD-506G-39-001 Version: G 20180129
Solution
Check if the battery is
1.
inserted correctly.
the
Replace the battery.
2.
Replace the entire smoke
3.
detector.
Replace the battery (see
section "Replacing the
battery").
1. Clean the smoke alarm
according to the instruc-
tions for use.
2. Have the smoke alarm
installed by a profession-
al at a different spot.
Check if there is an oper-
1.
ation error.
Clean the smoke alarm
2.
according to the instruc-
tions for use.
Advertisement
