Download Print this page

WilTec 30286 User Manual page 3

Rotary painting stand

Advertisement

Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
Do not use the stand when parts are damaged.
Do not climb or step onto the stand.
Never allow children and non-authorised persons to use the stand.
Do not use the stand near sources of current.
Always remove paint and varnish rests from all moving or adjustable components to ensure the
stability and the long service life of the stand.
Keep an eye on your surroundings while using the device.
Do not use the device when being tired or under the influence of alcohol, drugs, or medicine.
Only use the stand in a clean, tidy, and safe zone. Make sure that the stand stands on a flat and
stable surface.
Before using the stand, make sure that the floor is neither wet nor slippery. Wear non-slip shoes.
Always wear suitable work clothing. Avoid wearing wide clothes and jewellery and securely tie
long hair together.
Some components, due to the design of the stand, could be sharp-edged. It is therefore strongly
recommended that your wear protective gloves.
The stand must not be used in a way that might impair its stability and integrity and that might
endanger the user. Improper use might lead to property damage and personal injury.
Store the stand in a safe and dry zone.
During work, always wear appropriate protective equipment. The stand has moving parts that
could lead to your fingers being contused or loose parts of your clothes being caught.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 30286
Page 3
01
2022-1

Advertisement

loading