TxRail-USB Temperature Transmitter 0555 0035-01, 0555 0035-02 OREWORD Dear customer, We thank you for having purchased the TxRail-USB Temperature Transmitter and are very glad that you decided in favour of a product of B+B Thermo-Technik GmbH. We hope this product will fully satisfy you and will assist you effectively in your work.
TxRail-USB Temperature Transmitter 0555 0035-01, 0555 0035-02 Security Advices B+B Thermo-Technik GmbH assume no liability for damages occurred through failure to observe these security advices. A usage non conform to the instructions given in this manual can damage the device BODY AND PROPERTY DAMAGES The national and local standards for electrical installations must be se strictly observed.
TxRail-USB Temperature Transmitter 0555 0035-01, 0555 0035-02 NTRODUCTION The TxRail-USB is an USB configurable DIN rail mount temperature transmitter. It allows selection and configuration of input type, measurement range, output type and calibration. Its output can be set to either loop powered 4-20 mA or 0-10 Vdc. Highly accurate and user-friendly, the TxRail-USB performs well from simple to sophisticated measurement applications.
TxRail-USB Temperature Transmitter 0555 0035-01, 0555 0035-02 0-10 V 0-10 VDC or 10-0 VDC linear, proportional to the configured range Resolution 4-20 mA 2 µA 0-10 V 0,0025 V (12 bits) Power supply 4-20 mA Output 10 ... 35 VDC 0-10 V Output 12 ...
TxRail-USB Temperature Transmitter 0555 0035-01, 0555 0035-02 Recommended torque fort he connection screws: 0.8 Nm • Recommendations for Installation Conductors of small electrical signals must be distant from Power supply and high-tension/current conductors, preferably passing • through grounded conduits. A specific electrical power supply network should be provided for instruments use only •...
TxRail-USB Temperature Transmitter 0555 0035-01, 0555 0035-02 BBILDUNG 6.2.5 Output 8 Strom (rechts) - Spannung (links) BBILDUNG ONFIGURATION Changes to the configuration are possible through the TxConfig II software, provided free of charge. The transmitter configuration interface (USB cable) can be purchased from the manufacturer or its authorized sales representatives.
TxRail-USB Temperature Transmitter 0555 0035-01, 0555 0035-02 Software Configuration 10 Hauptfenster TxConfig II BBILDUNG The fields in the screen mean: General Information: This field shows information that identifying the transmitter. This information should be sent to the manufacturer in an eventual request for technical assistance.
TxRail-USB Temperature Transmitter 0555 0035-01, 0555 0035-02 any measurement errors. See item Zero Correction in the chapter CONFIGURATION of this manual. The user must choose the most suitable sensor and range to the process. The chosen range must not exceed the maximum range of measurement defined for the sensor and should not be smaller than the minimum range for the same sensor.
Need help?
Do you have a question about the 0555 0035-01 and is the answer not in the manual?
Questions and answers