Summary of Contents for Milano ME47582244
- Page 1 Boiling Water Tap Contents Safety Information Page ‑ 2 Installation Page ‑ 2 Warranty Information Page ‑ 5 Recycling & Disposal Page ‑ 5 DOC/IM/190/2018...
- Page 2 Safety Information Please read carefully... Check the product for defects before installing. This product should be installed by a qualified plumber or installer. For Information on installing the hot water boiler, please refer to the guide provided with it. This product deliverers Hot water at high temperatures, please exercise caution during use. Installation...
- Page 3 1. Unscrew the fixing nut off the tap. 2. Install the hoses onto the tap by screwing them in anti clockwise . 3. Insert the hoses throuh the tap hole, for ease of installation insert in the following order - 1.
- Page 4 Filling and venting the heating tank 1.Close the boiling water tap. 2.Open the mains valve. 3. Open the boiling water valve to fill in the tank until water flows out. from the tap. 4.Wait until water flows from the tap. 5.Let the water flow for 3 minutes until clear water flows from the tap.
- Page 5 Clean with a soft dry cloth, do not use abrasive cleaners. Recycling and Disposal Please recycle / dispose of this product in accordance with your local council / government guidelines. Contact Us MILANO Unit 1 & 2 Dawson Ct Burnley...
Need help?
Do you have a question about the ME47582244 and is the answer not in the manual?
Questions and answers