Page 1
Seidio Bluetooth GPS Receiver RBT-1000 Quick Guide Check the Package Content Before you start using Seidio Bluetooth GPS Receiver, RBT-1000, please check out if your package includes the following items. If any item is damaged or missed, please contact your reseller at once.
Getting Started STEP 1: Charge the Battery Before you use RBT-1000, the battery must be charged for at least four hours. As RBT-1000 is in charging, the Yellow LED will be lighted up. When the battery is fully charged, the Yellow LED will be turned off.
Page 3
•If you are required to type in pin code during configuration, please key in “0000”. How to replace Lithium-ion Battery Open the bolt on the bottom cover of RBT-1000 and take the Lithium-ion battery out. Place new Lithium-ion battery into the room of RBT-1000.
Page 4
It is suggested that use RBT-1000 under less shielded environment to ensure better performance. For the first position fix, please make sure your RBT-1000 is not in motion but stationary and in open space so as to shorten the fix time.