Table of Contents
Advertisement
Wall mounting Instruction:
1.) Use the metal bracket supplied with unit as template to mark anchor
hole locations, making sure that holes are leveled.
2.) Drill 3/16" holes.
3.) Insert the plastic anchor supplied with unit through the hole and tap it
until it is flush with the wall.
4.) Inset the screw and tighten the screw 1/8" away from the wall.
5.) Place the metal bracket and tighten the screws.
6.) Align the rectangular hook on the back of unit with the metal bracket
opening and slowly lower the unit to rest on the bracket.
7.) Make sure that the unit is securely attached to the bracket.
SMV122_ib_060402.p65
25
25
4/6/2002, 17:42
Advertisement
Table of Contents
