Operating Rules - MTX 350409 User Manual

LASER LEVEL WITH A DEVICE FOR DRILLING AND DUST BOX
1. Do not operate this device under direct sunlight, high temperature and humidity.
2. Do not drop the device and avoid strong shocks.
3. Do not dismantle the laser.
4. The responsibility for any improper use is carried by user.
5. If the device is placed in storage, be sure to disconnect the power and remove the battery.
1. Remove the protective cover
2. Attach the laser level to the working surface
3. Before using the laser level has to be aligned. To align the level horizontally, you need to install the air
bubble in the middle of the horizontal eye, vertically - in the vertical (drawing 1.).
4. Push down on the level, and switch on the microcompressor using button «9».
5. Be sure that the level sticks to the surface.
6. Turn on the laser by pressing the switch button «2». When you mark the location of future holes at a desired
distance by a laser beam (drawing 2).
7. Press the release button in order to track the device from the wall after marking.
8. Install the drill into the hole of collector and direct at marked point (drawing 3).
ATTENTION!
Dust collector performs its functions only on vertical surfaces.

OPERATING RULES

ORDER OF WORK
drawing 1
drawing 2
3