Page 3
PTP01 – Portable Trolley Portable Storage Trolley PTP01 is designed to allow for the mobile oper- ation of the PROTEUS Inspection System in difficult to reach areas, such ™ as inside buildings, or other locations a distance away from your vehicle. The...
Page 4
A Cable reel link cable for (Minicam Part No. LCP1.5). B CCU location pins C Battery pack link cable (Minicam Part No. ASS-002-974). D Keyboard support. E Battery pack fixing brackets. F Accessory box tray. G Cable reel (RMP100/RMP200/RAP200) fixing locations. Minicam Proteus Version B...
Page 5
Equipping PTP01 Portable Storage Trolley The PTP01 Portable Storage Trolley is delivered fully equipped* from the factory. Should you need to remove, then replace any of the equipment, please follow the instructions below. Control Unit 1 Position the CCU by aligning the location aper- tures (x) on the back of the CCU over and down onto the CCU location pins (B).
Page 6
PTP01 Portable Storage Trolley Equipped A Digital Control Unit B Accessory Case C Battery Pack (behind Accessory Case) D Cable Reel Minicam Proteus Version B...
Page 7
Technical Details - PTP01 Product ID: PTP01 Dimensions: 650 x 1150 x 720mm (Wx H x D) Weight: 9.75Kg (21.5lb) Unladen NOTES Version B Minicam Proteus...