Page 1
INSTALLATION AND OPERATING INSTRUCTIONS 1-point magnetic field sensor MFS02-K-KHC-P1-PNP MFS02-S-KHC-P1-PNP MFS01-K-KHC-P1-PNP MFS01-S-KHC-P1-PNP DDOC01460 THE KNOW-HOW FACTORY www.zimmer-group.com...
Page 3
Installation, commissioning and maintenance may only be performed by trained specialists. These persons must have read and understood the installation and operating instructions in full. Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com...
Page 4
► Please contact Zimmer Customer Service if you have any questions. 6.1 Electrical specifications INFORMATION ► You can find the information in the technical data sheet on our website. This data varies within the series, depending on the specific design. ► Please contact Zimmer Customer Service if you have any questions. Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com...
Page 5
► Install the sensor. ► Tighten the mounting screw using the hexagon socket key. Mounting screw ► Connect the sensor to the operating voltage. Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com...
Page 6
► Dispose of the components properly according to the material groups. ► Comply with the locally applicable environmental and disposal regulations. Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com...
Need help?
Do you have a question about the MFS Series and is the answer not in the manual?
Questions and answers