Waveshare RS485 TO ETH Manual page 7

485 TO ETH (B) User Manual
The parameters here are as follows:
1. Server upload time: The default JSON data is sent to the server every time. The server is
the destination IP set in the device configuration interface just now, and the unit is
milliseconds.
2. Add/View: After clicking, you can design every JSON node, or you can view the currently
designed content.
3. Delete all: Delete all Modbus registers designed by the "Add/View" button to facilitate the
restart of the design.
4. Save JSON settings: After the design is completed, only click this button to save the data
to the download directory just now, and then download it to the inside of the device.
Now click the "Add/View" button. For the first row of the previous Modbus table:
Register
address
0
The corresponding configuration is as follows:
Parameter name
Current total active
energy
Figure 5 Register settings
7 / 36
Byte
length
4 Unsigned,keep 2 decimal
Remarks
places
www.waveshare.com