Mini Fuse (Blade Type), Front Panel Block - Sony DSX-B700 Service Manual

DSX-B700/B700W/B710D
Note: Follow the disassembly procedure in the numerical order given.
3-2.

MINI FUSE (BLADE TYPE), FRONT PANEL BLOCK

9 front panel
block
boss
Note 2: When installing the cable flexible flat (22 core) to the connector (CN1007)
on the MAIN board, insert straight to the connector.
No slanting after insertion.
OK
Insert straight into the interior.
connector
cable flexible flat
(22 core)
17
7 Remove the front panel
block in the direction of
the arrow.
6 three
claws
8 Draw the cable flexible
flat (22 core) out of the
connector (CN1007).
boss
4 plate back
Note 1: When installing the plate
Insert only part way.
connector
cable flexible flat
(22 core)
– Top view –
5 two claws
hole
connector
(CN1007)
The opposite side
is terminal side.
3 screw
(B2 6)
boss
hole
2 screw
(PTT2.6 4)
back, align the four holes
and four bosses.
Note 3: The front panel block can be removed
NG
cable flexible flat
(22 core)
– Top view –
Sony CONFIDENTIAL
For Authorized Servicer
1 mini fuse
(blade type)
5 two claws
hole
boss
3 screw
hole
(B2
2 screw
(PTT2.6 4)
without removing the plate back.
In such cases, skip steps 2 and 4, and
continue with the procedure.
NG
Insert at a slant.
connector
– Top view –
6)
SYS SET