GVP 2221315 User Manual
  1. Manuals
  2. Brands
  3. GVP Manuals
  4. Inverter
  5. 2221315
  6. User manual

GVP 2221315 User Manual

Power inverter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
2221315 Inverter

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2221315 and is the answer not in the manual?

Questions and answers

Summary of Contents for GVP 2221315

  • Page 1 2221315 Inverter...

  • Page 2: Important Safety Instructions

    1.IMPORTANT SAFETY INSTRUCTIONS IMPORTANT Read and save this owner's guide for future reference. 1. Important Safety Instructions This chapter contains important safety and installation instructions for our inverter. Each 2. Introduction time, before using the power inverter, read all instructions and cautionary marking on or provided with inverter and all appropriate sections of this guide 3.

  • Page 3: Inverter Features

    3. INVERTER MATERIAL LIST RISK OF DANGER OF THE INVERTER The inverter ships with the following items: Never allow battery acid to drip on the inverter when reading gravity, or filling battery. Inverter unit Never place the inverter unit directly above batteries, gases from a battery will corrode and damage the inverter. User manuel Do not place a battery on top of the inverter.

  • Page 4: Inverter Installation

    colored black. 5.2 POWER SYSTEM CONNECTION EXAMPLE 2. Positive DC input terminal always connects to the positive terminal of the battery Figure 4 Typical power system designs via a positive DC input cable (red battery cable).the positive DC input terminal is colored red.

  • Page 5: Cables For Dc Input And Ground

    SAFE Ventilation openings on the inverter must not be obstructed. If the inverter is 9. INSTALL THE INVERTER mounted in a tight fitting compartment, the compartment must be ventilated with cut- Review and follow the safety guidelines in important safety instruction on page before outs to prevent the inverter from overheating.

  • Page 6: Inverter Operation

    9.4 CONNECT THE DC CABLE the battery without a battery selector switch. If you have installed a battery selector switch, use it to select one IMPORTANT: Before proceeding, make sure that your DC input cables are properly terminated with ring connectors appropriate for the size of the cable you are using. We advise you use the DC input cable inside of our inverters packing.

  • Page 7: Routine Maintenance

    10.2 THE OUTLETS (THE TYPE OPTIONAL) INSTALLED ON INVERTER AS FOLLOWS: 12. INVERTER LOADS The inverter will operate most AC loads within its power rating. However, some appliances and equipment may be difficult to operate, and other appliances may actually be damaged if you try to operate then with the inverter.

  • Page 8: Recharging Batteries

    1. Make sure that the chassis ground screw on the rear of the inverter is solidly connected 14.RECHARGING BATTERIES to the ground system of your vehicle or home. When possible, recharge your batteries when they about 50% discharged or earlier. This 2.

  • Page 9: Warranty Card

    Remove all batteries from the appliance in advance 17.1 and prevent any liquid containers from being damaged. Electronic equipment may 2221315 contain harmful substances. Improper use or malfunction caused by damage may adversely affect human health and harm the environment during recycling.

Table of Contents