Advertisement
Quick Links
Operation Manual
Tube Belt Sander
61966
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for XPOtool 61966
Summary of Contents for XPOtool 61966
- Page 1 Operation Manual Tube Belt Sander 61966 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
- Page 2 To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods. Returns Department WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler E-mail: service@wiltec.info Tel: +49 2403 55592–0 Fax: +49 2403 55592–15 https://www.XPOtool.com Item 61966 Page 2 The Tool Experts 05 2022-1...
- Page 3 Carry out a trial run: Allow the machine to run at idling speed for 30 s in a safe location. Stop immediately if significant vibrations occur or if other defects are noted. If such a situation occurs, check the machine to determine the cause. https://www.XPOtool.com Item 61966 Page 3 The Tool Experts 05 2022-1...
- Page 4 • Attaching the additional handle: Always work with the additional handle attached (4)! Se- cure the additional handle by screwing it tightly to the left or right. https://www.XPOtool.com Item 61966 Page 4 The Tool Experts 05 2022-1...
- Page 5 Using the additional handle, the belt can be pressed against the pipe and at same time placed around it. The angle of contact and the cutting output may be changed by the contact pressure. https://www.XPOtool.com Item 61966 Page 5 The Tool Experts...
- Page 6 • Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organization of work patterns. https://www.XPOtool.com Item 61966 Page 6 The Tool Experts 05 2022-1...
- Page 7 D-52249 Eschweiler Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. https://www.XPOtool.com Item 61966 Page 7 The Tool Experts 05 2022-1...