Coopers H948 Instructions

Cutwork Snowflake Lamp
H948
v01: 21/07/21
Please read and retain these instructions for future reference

Installation/User instructions

•
Assemble and position the lights without putting extreme pressure on the parts.
•
Open battery compartment as shown and insert 3x AAA batteries (not included). Move the switch to the
ON position.
•
This item has a timer with repeat function. When switched on the light will work for 6 hours and then
switch off automatically for 18 hours. It will then switch on again. The switch can be set either to ON or
OFF. To reset the timer, turn switch to the OFF position and switch back on at a different time.

Dimensions

(H) 19 x (D) 11cm
•
LASER CUT METAL LANTERN
•
CUTWORK DESIGN WITH LED CANDLE INSIDE (LEDs not replaceable)
•
LIGHT PROJECTS THROUGH THE DESIGN AND CREATES A FESTIVE
PATTERN AROUND THE ROOM
•
3PCS AAA BATTERIES REQUIRED (not included)
•
TIMER FUNCTION
•
PROJECTS LIGHT ONTO WALLS AND SURROUNDINGS DISPLAYING
SNOWFLAKE DESIGNS.
This is not a toy. Do not let children play with the product.
Safe around children and pets.
Do not expose the product to extreme heat or extreme pressure.