DuraMax 68004 Quick Manual

Rove 62” industrial 3 drawer metal & wood workbench

Advertisement

Step 8
Step 9

CARE AND MAINTENANCE

1. Use a soft, clean cloth that will not scratch the surface while cleaning.
2. Using solvents of any kind on your product may damage the finish.
3. Do not use any harsh abrasives or chemicals to clean any metal surface as it may damage the protective coating.

LIMITED LIFETIME WARRANTY

This product is warranted to the original purchaser. If there is a failure in this unit due to defects in materials or workmanship, the
manufacturer will repair or replace this item at our discretion without charge. Warranty is void if product has been assembled
incorrectly, misused, abused by overloading, altered in any way or damaged due to accident. This warranty is not transferable
and does not cover chipping, flaking, scratches, rust, dents, or other damages to the surfaces of this product. Responsibility of the
manufacturer is limited to repair or replacement of this product. The manufacturer is not responsible for consequential, incidental,
or other damages or losses resulting from product failure.
This warranty is in lieu of all other expressed warranties. Some states do not allow the exclusion or limitation of incidental or
consequential damages, therefore, the above limitation may not apply to you. This warranty gives you specific legal rights and you
may have other rights which vary from state-to-state.
U.S. Polymers Inc.
1057 S. Vail Ave.
Montebello, CA 90640
United States of America
8
J
N
w w w . d u r a m a x b p . c o m
SKU#68004-1
ROVE 62" INDUSTRIAL 3 DRAWER
IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE
WARNING
Your safety and the safety of others is important to us.
Failure to follow these guidelines can result in property damage or personal injury.
• The product is for indoor use only (Not recommended for outdoor use).
• We strongly recommend that at least two or more adults move and assemble this unit.
• Please ensure that all steps are completed before fully tightening the bolts.
Customer Service: 1-888-444-0104 Monday - Friday: 8:00 a.m. - 4:30 p.m. PST
1
RD-1.0
29-12-2021
METAL & WOOD WORKBENCH
www.duramaxbp.com
ITEM #68004
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 68004 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for DuraMax 68004

  • Page 1 ASSEMBLY INSTRUCTIONS ITEM #68004 Step 8 ROVE 62” INDUSTRIAL 3 DRAWER METAL & WOOD WORKBENCH Step 9 IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE CARE AND MAINTENANCE WARNING 1. Use a soft, clean cloth that will not scratch the surface while cleaning.
  • Page 2 PARTS PARTS LIST A x 1 H x 2 Bottom Beam B x 1 I x 1 Left Back Leg Tie Support C x 1 J x 1 Right Back Leg Wire Deck D x 1 K x 16 Right Front Leg M8 Hex Bolt E x 1 L x 16...
  • Page 3 ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS Step 1 Step 2 Remove only left and right drawers to start the assembly process K x 8 L x 8 M x 8 Step 3 To Remove the Drawer • Open the drawer to its full extension. •...
  • Page 4 ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS Step 4 Step 6 K x 4 L x 4 M x 4 M x 4 Step 5 Step 7 K x 4 L x 4 M x 4...

Table of Contents