Download Print this page

Safety Warning - V-TAC VT-5050 Installation Instruction

Led strip light kit
Hide thumbs Also See for VT-5050:

Advertisement

Multi-Language Manual - QR CODE
Please scan the QR code to access the manual in
multiple languages.

SAFETY WARNING

1. Please cut the LED Smart Striplight according to the cutting as shown in the instructions.
Cutting outside the marking will damage the product. Please cut only on the dotted/scissor
marking on the LED Smart Strip light
2. LED Smart Strip Light cannot be folded, bent or twisted during the installation. Please install
in a straight direction. DO NOT turn on power until LED light is connected properly and
well-installed.
3. DO NOT touch/cut the LED Smart Striplight when power is on.
4. DO NOT power the LED Smart Striplight in roll/package.
5. DO NOT install in a flammable environment, and make sure the light is well ventilated.
6. DO NOT wrap or cover LED Smart Striplight with any objects. NOT suitable for outdoor use
7. DO NOT directly connect LED Smart Light to AC power. Special power plug is needed(*pow-
er plug included)
8. LED Smart Strip Light are limited to indoor use and are not advisable for use in humid
environment
9. LED Smart Strip Light cannot be installed on the surface of ordinary combustible materials.
Increase in temperature is normal for LED Smart Strip Lights.
10. Do not exert external force or throw on the LED Smart Strip Light.
11. LED Smart Strip Light should be stored in cool/dry place. Always make sure the environ-
ment is clean before installing the LED Smart Strip Light.
12. Do not discard the light with regular trash. LED Smart Strip Light are made with electronic
components and should be properly disposed at designated locations with unified treatment
like traditional electronic equipment.
13. Please make sure to turn off the power before starting the installation.
14. The light source of this luminaire is not replaceable, when the light source reaches its end
of life the whole luminaire should be replaced.
15. Installation must be performed by a qualified electrician.
This marking indicates that this
product should not be disposed
of with other household wastes.
Caution, risk of electric shock.
5
ENGLISH

Advertisement

loading